Lume coaster
namandhakad712·lume-coaster·carrier-board/lume-coaster/lume-coaster.kicad_pcb
About the Lume coaster PCB
Lume coaster is an open source PCB design by namandhakad712, published on GitHub. It is a 2-layer board measuring 85 × 40 mm, with 33 components from 22 distinct parts.
By type, the board carries 6 connectors, 3 switches, 1 transistor, 1 battery holder and 1 diode.
It belongs with the power & battery, dev boards & breakouts and displays & leds designs in this gallery.
From the project
HalfLife-Hackclub Week 1
A carrier board for the Tuya T5AI-Core (T5-E1) module — the kind of board you design once so the module stops being a tangle of Dupont wires and starts being an actual thing on your desk. It's a coaster-sized slab that the module plugs into.
It breaks the module out onto a single 85 × 40 mm PCB:
- a 44-pin socket for the module, - a 9-pin header for a 2.8" ILI9341 SPI colour LCD, - three tactile buttons (mode / up / down), - a 3-pin header for an active chime / buzzer, - an onboard single-cell LiPo battery supply with a USB-C charge path, - a P-MOS high-side switch for the display backlight.
Lume coaster bill of materials (BOM)
33 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | T5AI_CORE_BOT | PinSocket_1x22_P2.54mm_Vertical | J1_BOT |
| 1 | T5AI_CORE_TOP | PinSocket_1x22_P2.54mm_Vertical | J1_TOP |
| 1 | ILI9341_SPI_LCD | PinHeader_1x09_P2.54mm_Vertical | J2 |
| 1 | ACTIVE_CHIME | PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | TO_MODULE_CN1 | JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J4_HARNESS |
| 1 | TYPE-C-31-M-12 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J5 |
| 1 | LIPO_CELL | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | BT1 |
| 1 | 10uF | C_0805_2012Metric | C_BAT1 |
| 7 | 100nF | C_0805_2012Metric | C_BAT2, C_BTN1, C_BTN2, C_BTN3, C_DEC1, C_DEC2, C_DISP2 |
| 1 | 100uF | CP_Elec_6.3x5.4 | C_DISP1 |
| 1 | 4.7uF | C_0805_2012Metric | C_USB1 |
| 2 | 100k | R_0805_2012Metric | R_BAT1, R_BAT2 |
| 4 | 10k | R_0805_2012Metric | R_BL1, R_BTN1, R_BTN2, R_BTN3 |
| 1 | 100R | R_0805_2012Metric | R_BL2 |
| 2 | 5.1k | R_0805_2012Metric | R_CC1, R_CC2 |
| 1 | 1k | R_0805_2012Metric | R_CHIME1 |
| 1 | 4.7k | R_0805_2012Metric | R_CHIME2 |
| 1 | MODE | SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW1 |
| 1 | UP | SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW2 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DOWN | SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW3 |
| 1 | SS14 | D_SMA | D1 |
Lume coaster design files
The KiCad project lives in the namandhakad712/lume-coaster repository on GitHub; these links point at the commit this page was built from.
Lume coaster: common questions
How big is the Lume coaster PCB?
The Lume coaster measures 85 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lume coaster?
33 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lume coaster design files?
From the namandhakad712/lume-coaster repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lume coaster design in my own project?
The repository has no license, so all rights stay with namandhakad712. Use it as a reference, and ask the author before reusing the design.
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k