Serial km emulator
nananek·serial-km-emulator
About the Serial km emulator PCB
Serial km emulator is an open source PCB design by nananek, published on GitHub under the MIT license. It is a 2-layer board measuring 57.6 × 31.4 mm, with 21 components from 10 distinct parts.
Other key parts include the CH9329 and CH340N. By type, the board carries 7 capacitors, 5 resistors, 4 diodes, 2 ICs, 2 connectors and 1 LED.
It belongs with the keyboards designs in this gallery.
From the project
CH9329 USB keyboard/mouse emulator board (KiCad), FRISK-size, dual USB-C
MR-CH9329EMU-USB(マルツの CH9329 モジュール)の代替を JLCPCB の SMT 実装で作るための KiCad プロジェクトです。シリアル側とキーボード/マウス側の両方を USB Type-C にしています。
- 基板: 57.6 × 31.4 × 1.6 mm、2 層。実物の FRISK ケース内寸(67.0 × 32.4 mm)の左側に 0.5 mm ずつ逃がして置き、右側はラッチ張り出しとのクリアランスを残した寸法です - 紙ケース: docs/papercasea4.pdf(A4、1:1。フリスクケース加工の代替) - 回路図: docs/schematic.pdf - データシートとシルクの対応: docs/datasheets.md - 配線図: docs/pcb_routing.png(GND ベタを消して配線を見やすくしたもの) - 部品: 21 点、10 種類。すべて JLCPCB の在庫部品(2026-10 時点)。このほかに、実装しないテストパッドを 2 点置いています - ファームウェア不要。CH9329 の内蔵ファームで動きます

Main components on the Serial km emulator
Serial km emulator bill of materials (BOM)
21 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH9329 | SO-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | CH340N | SO-8_3.9x4.9mm_P1.27mm | U2 |
| 2 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1, J2 |
| 1 | KT-0603R | LED_0603_1608Metric | LED1 |
| 2 | BAT54WS | D_SOD-323 | D1, D2 |
| 2 | USBLC6-2SC6 | SOT-23-6 | D3, D4 |
| 6 | 100NF 100nF | C_0603_1608Metric | C1, C2, C3, C4, C6, C7 |
| 1 | 10UF 10uF | C_0805_2012Metric | C5 |
| 4 | 5.1K 5.1k | R_0603_1608Metric | R1, R2, R3, R4 |
| 1 | 1k | R_0603_1608Metric | R5 |
Serial km emulator design files
The KiCad project lives in the nananek/serial-km-emulator repository on GitHub; these links point at the commit this page was built from.
Serial km emulator: common questions
How big is the Serial km emulator PCB?
The Serial km emulator measures 57.6 × 31.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Serial km emulator?
21 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Serial km emulator design files?
From the nananek/serial-km-emulator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Serial km emulator design in my own project?
Yes, under the terms of its MIT license, which nananek chose for the repository.