5 open source boards using the CH9329
Real designs built with the CH9329, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
RKD-OLD
PTALTS-LK
100 × 94 mm86 parts2LGPL-3.041ESP32
Joker60 mkII
ZeshuLiu
323.5 × 102.5 mm193 parts2LMIT0Kvm board
nananek
65.4 × 31.4 mm21 parts2LMIT0Serial km emulator
nananek
57.6 × 31.4 mm21 parts2LMIT0ESP32
WiFi KeyMouse
74th
20 × 42.4 mm26 parts2LMIT1
How designs wire the CH9329
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the CH9329 connects to, and the resistors, capacitors and other passives placed on it.
- The RST pin is left unconnected on 5 of 5 designs.
- The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF).
- The V33 pin has a capacitor to GND on 4 of 5 designs, most often 100 nF.
- The MODE0 pin is left unconnected on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| MODE0pin 2 | Connected to: Not connected 80% · 3.3V 20% | — |
| MODE1pin 3 | Connected to: Not connected 80% · GND 20% | — |
| CFG0pin 4 | Connected to: Not connected 80% · 3.3V 20% | — |
| CFG1pin 5 | Connected to: Not connected 80% · 3.3V 20% | — |
| RSTpin 6 | Connected to: Not connected 100% | — |
| UPpin 9 | Connected to: Not connected 80% · a signal 20% | — |
| DEFpin 10 | Connected to: Not connected 80% · a signal 20% | — |
| GNDpin 14 | Connected to: GND 100% | — |
| VCCpin 15 | Connected to: 5V 100% |
|
| V33pin 16 | Connected to: Signal 80% · 3.3V 20% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RKD-OLD by PTALTS-LK, WiFi KeyMouse by 74th, Kvm board by nananek and Serial km emulator by nananek.
The CH9329 in open source designs
The gallery holds 5 open source boards using the CH9329 from 5 GitHub repositories; a typical one measures about 65.4 × 42.4 mm and carries around 26 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is RKD-OLD by PTALTS-LK.
Parts used alongside the CH9329
Microcontrollers on boards using the CH9329
What boards using the CH9329 are built for
CH9329: common questions
Where can I find a CH9329 reference design?
Each of the 5 boards on this page is a real design using the CH9329. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the CH9329 RST pin connected?
The RST pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the CH9329.
What decoupling capacitors do designs use on the CH9329 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the CH9329.
How is the CH9329 V33 pin connected?
The V33 pin has a capacitor to GND on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the CH9329.
Which microcontrollers do boards using the CH9329 use?
Most are built on ESP32 (2) and RP2040/RP2350 (1).
How big is a typical board using the CH9329?
The median is 65.4 × 42.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the CH9329?
By GitHub stars, RKD-OLD by PTALTS-LK, with 41 stars.
Can I simulate one of these boards using the CH9329 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.