HardLabs

NANO-Minipops

NANOmodules·NANO-Minipops·DESIGN FILES/NANO-Minipops.kicad_pcb

NANO-Minipops PCB layout, top view — open source AVR/Arduino board by NANOmodules
Simulate this board

About the NANO-Minipops PCB

NANO-Minipops is an open source AVR/Arduino PCB design by NANOmodules, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 18 components from 9 distinct parts.

Its main chip is the Arduino_Uno_Shield, from the AVR/Arduino family. By type, the board carries 8 switches, 2 connectors, 2 capacitors, 2 resistors and 1 diode.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Minipops drum machine shield for Arduino Uno.

Arduino project based in Minipops design by Jan Ostman (DSP Synthesizers)

The hardware consists in an Arduino Uno including it shield with 9 slide switches, 2 rotary potentiometers and 1 LED. Software in the CODE folder contains all the necessary to convert your Arduino Uno in a Minipops drum box.

Click on the image to watch the presentation video!

Link of the video: https://www.youtube.com/watch?v=v7ahzl_3tDo&t=2s

NANO-Minipops, from the project README
From the project README

NANO-Minipops bill of materials (BOM)

18 components, 9 distinct parts.

QtyPartRefs
1
Jack
J1
1
Conn_01x02
J2
2
POT
RV1, RV2
8
_
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
1
Arduino_Uno_Shield
XA1
1
LED
D1
1
10uF
C1
1
100nF
C2
2
1k
R1, R2

NANO-Minipops design files

The KiCad project lives in the NANOmodules/NANO-Minipops repository on GitHub; these links point at the commit this page was built from.

NANO-Minipops: common questions

What microcontroller does the NANO-Minipops use?

The NANO-Minipops is built around the Arduino_Uno_Shield, from the AVR/Arduino family.

How big is the NANO-Minipops PCB?

The NANO-Minipops measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the NANO-Minipops?

18 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the NANO-Minipops design files?

From the NANOmodules/NANO-Minipops repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the NANO-Minipops design in my own project?

The repository has no license, so all rights stay with NANOmodules. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the NANO-Minipops without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards