Project four port usb2.0-hub nathaniel
About the Project four port usb2.0-hub nathaniel PCB
Project four port usb2.0-hub nathaniel is an open source PCB design by nathaniel-nemeth, published on GitHub. It is a 2-layer board measuring 86.5 × 37.5 mm, with 34 components from 15 distinct parts.
Other key parts include the SRV05-4 and FE1.1s. By type, the board carries 11 resistors, 8 capacitors, 5 connectors, 5 diodes, 4 ICs and 1 crystal.
From the project
A 4-port USB2.0 hub design
Main components on the Project four port usb2.0-hub nathaniel
Project four port usb2.0-hub nathaniel bill of materials (BOM)
34 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | SRV05-4 | SOT-23-6 | U1, U2, U4 |
| 1 | FE1.1s | SSOP-28_3.9x9.9mm_P0.635mm | U3 |
| 1 | 12MHz | Crystal_HC49-U_Vertical | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 4 | USB_A | USB_A_Stewart_SS-52100-001_Horizontal | J2, J3, J4, J5 |
| 4 | LED_G | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D3, D4, D5 |
| 1 | LED_R | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 4 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C6, C7 |
| 3 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C5 |
| 1 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 2 | 5.1kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 4 | 100kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R7, R10 |
| 1 | 2.7kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 3 | 470Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R8, R11 |
| 1 | 47kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
Project four port usb2.0-hub nathaniel design files
The KiCad project lives in the nathaniel-nemeth/project-four-port-usb2.0-hub-nathaniel repository on GitHub; these links point at the commit this page was built from.
- LayoutUSB 2.0 Hub.kicad_pcb
- SchematicUSB 2.0 Hub.kicad_sch
- BOMUSB 2.0 Hub BoM.csv
Project four port usb2.0-hub nathaniel: common questions
How big is the Project four port usb2.0-hub nathaniel PCB?
The Project four port usb2.0-hub nathaniel measures 86.5 × 37.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Project four port usb2.0-hub nathaniel?
34 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Project four port usb2.0-hub nathaniel design files?
From the nathaniel-nemeth/project-four-port-usb2.0-hub-nathaniel repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Project four port usb2.0-hub nathaniel design in my own project?
The repository has no license, so all rights stay with nathaniel-nemeth. Use it as a reference, and ask the author before reusing the design.