7 open source boards using the FE1.1s
Real designs built with the FE1.1s, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP82666xUSB PowMet
aleksejm
92.3 × 69 mm161 parts2LNo license7
Skibidi phone usb hub
tobycm
70 × 50 mm30 parts4LMIT4
ESP32Msxnano dock
Papipapito
120 × 70 mm85 parts2LNo license1
ESP32Mainboard
KavyanshKhaitan2
209.9 × 122.9 mm81 parts2LNo license0
ESP8266PowMetV2.2
95.2 × 67.5 mm155 parts2LNo license7
RP2040/RP2350Msxnano board8020
85 × 56 mm39 parts4LNo license1
AVR/Arduino6xUSB PowMet hub
201.4 × 150.7 mm97 parts2LNo license7
The FE1.1s in open source designs
The gallery holds 7 open source boards using the FE1.1s from 4 GitHub repositories; a typical one measures about 95.2 × 69 mm and carries around 85 components.
71% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is 6xUSB PowMet by aleksejm.
Parts used alongside the FE1.1s
Microcontrollers on boards using the FE1.1s
What boards using the FE1.1s are built for
FE1.1s: common questions
Where can I find a FE1.1s reference design?
Each of the 7 boards on this page is a real design using the FE1.1s. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the FE1.1s use?
Most are built on ESP32 (2), ESP8266 (2), AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the FE1.1s?
The median is 95.2 × 69 mm, and 71% are two-layer designs.
What is the most popular open source board using the FE1.1s?
By GitHub stars, 6xUSB PowMet by aleksejm, with 7 stars.
Can I simulate one of these boards using the FE1.1s before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.