LTC6373 Daughterboard
About the LTC6373 Daughterboard PCB
LTC6373 Daughterboard is an open source PCB design by NathansLab, published on GitHub. It is a 2-layer board measuring 18.3 × 17 mm, with 12 components from 4 distinct parts.
Other key parts include the LTC6373IDFM#PBF. By type, the board carries 6 capacitors and 1 IC.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
KiCad 10 project for the Wireless BERA v1.0 board.
KiCad 10 project for the Wireless BERA v1.0 board.
The authoritative pin map as used by the firmware lives in ../firmware/wirelessbera/main/board.h`.
The populated v1.0 board and what is deliberately left off it are documented in ../docs/hardwarebringupplan.md.
Main components on the LTC6373 Daughterboard
LTC6373 Daughterboard bill of materials (BOM)
12 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC6373IDFM#PBF LTC6373 | LTC6373_DFN-12 | U1 |
| 5 | 5000 Header_Pin | TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded | H1, H2, H3, H6, H7 |
| 1 | C0603C181J5GACTU 180p | C_0603_1608Metric | C1 |
| 5 | C0603C104K5RACTU 100n | C_0603_1608Metric | C2, C3, C4, C5, C6 |
LTC6373 Daughterboard design files
The KiCad project lives in the NathansLab/WirelessBERA repository on GitHub; these links point at the commit this page was built from.
LTC6373 Daughterboard: common questions
How big is the LTC6373 Daughterboard PCB?
The LTC6373 Daughterboard measures 18.3 × 17 mm, has 2 copper layers and is 1.579 mm thick.
How many components are on the LTC6373 Daughterboard?
12 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LTC6373 Daughterboard design files?
From the NathansLab/WirelessBERA repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LTC6373 Daughterboard design in my own project?
The repository has no license, so all rights stay with NathansLab. Use it as a reference, and ask the author before reusing the design.
More boards in WirelessBERA
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k