My-First-STM

NaurasShaji·My-First-STM-PCB

My-First-STM PCB layout, top view — open source STM32 board by NaurasShaji

About the My-First-STM PCB

My-First-STM is an open source STM32 PCB design by NaurasShaji, published on GitHub. It is a 2-layer board measuring 31 × 18.5 mm, with 28 components from 16 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.

It belongs with the power & battery and dev boards & breakouts designs in this gallery.

From the project

This repository contains the design files for my first printed circuit board (PCB) - a microcontroller and USB interface system built around the STM32F103C8T6 ARM Cortex-M3 processor. This project represents a significant milestone in my electronics engineering journey, demonstra

This repository contains the design files for my first printed circuit board (PCB) - a microcontroller and USB interface system built around the STM32F103C8T6 ARM Cortex-M3 processor. This project represents a significant milestone in my electronics engineering journey, demonstrating practical application of hardware design principles.

- EDA Software: KiCad 7.x - Schematic Capture: KiCad Eeschema - PCB Layout: KiCad Pcbnew - 3D Visualization: KiCad 3D Viewer

Main components on the My-First-STM

My-First-STM bill of materials (BOM)

28 components, 16 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32F103C8T6
U2
1
16Mhz
Y1
1
USB_OTG
J1
3
Conn_01x04_Pin
J2, J3, J4
1
SW_SPDT
SW1
1
RED
D1
1
120R
FB1
2
22u
C1, C2
2
1u
C3, C5
1
10n
C4
1
10u
C6
5
100n
C7, C8, C9, C10, C11
2
10p
C12, C13
4
1k5
R1, R3, R4, R5
1
10k
R2

My-First-STM design files

The KiCad project lives in the NaurasShaji/My-First-STM-PCB repository on GitHub; these links point at the commit this page was built from.

My-First-STM: common questions

What microcontroller does the My-First-STM use?

The My-First-STM is built around the STM32F103C8T6, from the STM32 family.

How big is the My-First-STM PCB?

The My-First-STM measures 31 × 18.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the My-First-STM?

28 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the My-First-STM design files?

From the NaurasShaji/My-First-STM-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the My-First-STM design in my own project?

The repository has no license, so all rights stay with NaurasShaji. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the My-First-STM without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards