Greenhouse Node (TS)
About the Greenhouse Node (TS) PCB
Greenhouse Node (TS) is an open source STM32 PCB design by nbolton, published on GitHub. It is a 4-layer board measuring 70 × 50 mm, with 27 components from 19 distinct parts.
Its main chip is the STM32F030F4P6, from the STM32 family. Other key parts include the PCF8574ATS/3,118, XC6706x and RFM69HW. By type, the board carries 7 resistors, 6 capacitors, 5 diodes, 4 ICs, 3 connectors and 1 antenna.
Main components on the Greenhouse Node (TS)
Greenhouse Node (TS) bill of materials (BOM)
27 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F030F4P6 | TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | PCF8574ATS/3,118 | SSOP-20_4.4x6.5mm_P0.65mm | U7 |
| 1 | XC6706x | SOT-89-3 | U8 |
| 1 | RFM69HW | HopeRF_RFM69HW | U9 |
| 1 | Conn_01x12_Male | JST_PH_B12B-PH-K_1x12_P2.00mm_Vertical | J1 |
| 1 | Conn_01x02_Pin | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J7 |
| 1 | U.FL-R-SMT-1 | U.FL_Hirose_U.FL-R-SMT-1_Vertical | AE1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | BAT46 | D_DO-35_SOD27_P7.62mm_Horizontal | D6 |
| 1 | LED_Sm_G | LED_D3.0mm | D7 |
| 1 | LED_Sm_R | LED_D3.0mm | D8 |
| 1 | LED_Sm_Y | LED_D3.0mm | D9 |
| 1 | LED_Sm_B | LED_D3.0mm | D10 |
| 4 | 100nF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C10, C13, C15 |
| 2 | 10nF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C14, C16 |
| 3 | 5k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R9, R12 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R11 |
Greenhouse Node (TS) design files
The KiCad project lives in the nbolton/greenhouse repository on GitHub; these links point at the commit this page was built from.
Greenhouse Node (TS): common questions
What microcontroller does the Greenhouse Node (TS) use?
The Greenhouse Node (TS) is built around the STM32F030F4P6, from the STM32 family.
How big is the Greenhouse Node (TS) PCB?
The Greenhouse Node (TS) measures 70 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Greenhouse Node (TS)?
27 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Greenhouse Node (TS) design files?
From the nbolton/greenhouse repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Greenhouse Node (TS) design in my own project?
The repository has no license, so all rights stay with nbolton. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Greenhouse Node (TS) without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in greenhouse
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k
STM32Brain board STM32F407
61.8 × 73.2 mm69 parts2LGPL-3.01.2k