27 open source boards using the RFM69HW
Real designs built with the RFM69HW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
STM32 Sensor
freynder
35.6 × 20.3 mm26 parts2LNo license12Raspberry Pi
MySensorsPiGw
llegoff
65 × 30 mm26 parts2LCERN-OHL-1.28Microchip SAM
SensebenderGW
mysensors
50 × 50 mm70 parts2LNo license7AVR/Arduino
BOX-2252
fallberg
50.5 × 70 mm60 parts2LCERN-OHL-1.27AVR/Arduino
Mini-BT-Pcb-328P
d-diot
55 × 35 mm48 parts2LNo license3Microchip SAM
SensebenderMicro2
tbowmo
21.5 × 32 mm40 parts2LNo license2Greenhouse Control Unit
nbolton
188 × 90.2 mm85 parts4LNo license1AVR/Arduino
SPEED GOVERNOR TRIAL 1
KaburaJ
61 × 57.8 mm26 parts2LNo license1ESP32
Project5-ESP32-WROOM-PZEM
HowardsPlayPen
95 × 70 mm45 parts2LNo license0ESP32
Mainboard
DrGlaucous
70 × 100 mm20 parts2LNo license0AVR/Arduino
LE-BOX-0028
fallberg
76 × 96 mm60 parts2LCERN-OHL-1.27STM32
Greenhouse Node HB (Mini)
nbolton
70 × 50 mm37 parts4LNo license1STM32
BUT Pneumobil - HMI
kajusK
133.5 × 95 mm115 parts2LNo license0SAPI LoRa Arduino Shield V1.0
alexandreberg
68.6 × 53.3 mm20 parts2LAGPL-3.00AVR/Arduino
MySensorsNode
fallberg
50 × 50 mm58 parts2LCERN-OHL-1.27AVR/Arduino
EasyPCB 10 RFM69hw
sundberg84
50 × 49.9 mm30 parts2LNo license5AVR/Arduino
MySensors 8RelaisReed
LudovicLemarinel
81.3 × 59.7 mm34 parts2LNo license4STM32
Greenhouse Node (TS)
nbolton
70 × 50 mm27 parts4LNo license1SPEED GOVERNOR TRIAL 2
KaburaJ
34.3 × 23.6 mm10 parts2LNo license1STM32
Transmitter
DrGlaucous
70 × 30 mm4 parts2LNo license0AVR/Arduino
MySensors 8Relais
LudovicLemarinel
85 × 95 mm25 parts2LNo license4AVR/Arduino
MySensors 2Relais
LudovicLemarinel
56 × 57 mm17 parts2LNo license4STM32
BUT Pneumobil - Radio to USB converter
kajusK
37.2 × 24 mm24 parts2LNo license0AVR/Arduino
MySensors Gateway
LudovicLemarinel
64 × 34 mm15 parts2LNo license4AVR/Arduino
MySensors 1Relay
LudovicLemarinel
42.5 × 50 mm14 parts2LNo license4AVR/Arduino
MySensors FilPilote RFM69
LudovicLemarinel
47.5 × 49 mm14 parts2LNo license4AVR/Arduino
MySensors SensitiveTouch
LudovicLemarinel
43 × 45 mm14 parts2LNo license4
How designs wire the RFM69HW
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the RFM69HW connects to, and the resistors, capacitors and other passives placed on it.
- The DIO1 pin is left unconnected on 12 of 13 designs.
- The DIO4 pin is left unconnected on 12 of 12 designs.
- The 3.3V pin is tied to 3.3V on 12 of 14 designs.
- The DIO2 pin is left unconnected on 11 of 12 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DIO1pin 3 | Connected to: Not connected 92% | — |
| DIO2pin 4 | Connected to: Not connected 92% | — |
| DIO3pin 5 | Connected to: Not connected 92% | — |
| DIO4pin 6 | Connected to: Not connected 100% | — |
| DIO5pin 7 | Connected to: Not connected 83% · a signal 17% | — |
| 3.3Vpin 8 | Connected to: 3.3V 86% | — |
| GNDpin 9, 11 | Connected to: GND 93% | — |
| NCpin 16 | Connected to: Not connected 100% | — |
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include STM32 Sensor by freynder, MySensorsPiGw by llegoff, MySensorsNode by fallberg and SensebenderGW by mysensors.
The RFM69HW in open source designs
The gallery holds 27 open source boards using the RFM69HW from 14 GitHub repositories; a typical one measures about 61 × 50 mm and carries around 26 components.
89% are two-layer designs, the rest use four layers or more, and 19% carry an open source license.
The most starred is STM32 Sensor by freynder.
Parts used alongside the RFM69HW
Microcontrollers on boards using the RFM69HW
What boards using the RFM69HW are built for
RFM69HW: common questions
Where can I find a RFM69HW reference design?
Each of the 27 boards on this page is a real design using the RFM69HW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the RFM69HW DIO1 pin connected?
The DIO1 pin is left unconnected on 12 of 13 designs. Counted from the KiCad layouts of 14 open source designs using the RFM69HW.
How is the RFM69HW DIO4 pin connected?
The DIO4 pin is left unconnected on 12 of 12 designs. Counted from the KiCad layouts of 14 open source designs using the RFM69HW.
How is the RFM69HW 3.3V pin connected?
The 3.3V pin is tied to 3.3V on 12 of 14 designs. Counted from the KiCad layouts of 14 open source designs using the RFM69HW.
What parts are used alongside the RFM69HW?
The ATSHA204A, NRF24L01, AMS1117-3.3, ArduinoProMini and AT25DF512C appear in the most repositories here.
Which microcontrollers do boards using the RFM69HW use?
Most are built on AVR/Arduino (13), STM32 (6), ESP32 (2) and Microchip SAM (2).
How big is a typical board using the RFM69HW?
The median is 61 × 50 mm, and 89% are two-layer designs.
What is the most popular open source board using the RFM69HW?
By GitHub stars, STM32 Sensor by freynder, with 12 stars.
Can I simulate one of these boards using the RFM69HW before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.