HardLabs

Greenhouse battery junction

nbolton·greenhouse·hardware/greenhouse-battery-junction/greenhouse-battery-junction.kicad_pcb

Greenhouse battery junction PCB layout, top view — open source board by nbolton

About the Greenhouse battery junction PCB

Greenhouse battery junction is an open source PCB design by nbolton, published on GitHub. It is a 2-layer board measuring 87 × 15.6 mm, with 8 components from 6 distinct parts.

By type, the board carries 6 connectors, 1 fuse and 1 resistor.

It belongs with the power & battery designs in this gallery.

Greenhouse battery junction bill of materials (BOM)

8 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Conn_01x10_Female
J1
2
Conn_01x03_Female
J2, J10
2
Screw_Terminal_01x02
J11, J13
1
Conn_01x04_Male
J12
1
Fuse
F1
1
R
R12

Greenhouse battery junction design files

The KiCad project lives in the nbolton/greenhouse repository on GitHub; these links point at the commit this page was built from.

Greenhouse battery junction: common questions

How big is the Greenhouse battery junction PCB?

The Greenhouse battery junction measures 87 × 15.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Greenhouse battery junction?

8 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Greenhouse battery junction design files?

From the nbolton/greenhouse repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Greenhouse battery junction design in my own project?

The repository has no license, so all rights stay with nbolton. Use it as a reference, and ask the author before reusing the design.

More boards in greenhouse

Similar boards