LedButton rev1
About the LedButton rev1 PCB
LedButton rev1 is an open source PCB design by nealpalmer, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 13.2 × 15.7 mm, with 5 components from 3 distinct parts.
From the project
USB Joystick Controller 12Digital/SmartButton, 4Analog, 1Rotary, 1NeoPixel
This is a couple of circuit boards that make up a fancy USB joystick controller for FRC #2984. It has both a HID joystick interface and a HID uart interface (for configuration) presented to the computer (i.e. it works in Windows and Linux). No embedded programming experience is necessary to get it to work! It also looks like just a HID analog joystick to Windows.
LedButton rev1 bill of materials (BOM)
5 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Blade_LED | blade_3.75x1 | J3, J4 |
| 2 | Blade_SW | blade_3.75x1 | J5, J6 |
| 1 | Conn_01x04_Pin | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J7 |
LedButton rev1 design files
The KiCad project lives in the nealpalmer/UsbJoy repository on GitHub; these links point at the commit this page was built from.
LedButton rev1: common questions
How big is the LedButton rev1 PCB?
The LedButton rev1 measures 13.2 × 15.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LedButton rev1?
5 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LedButton rev1 design files?
From the nealpalmer/UsbJoy repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LedButton rev1 design in my own project?
Yes, under the terms of its GPL-3.0 license, which nealpalmer chose for the repository.
