HardLabs

GPS Carrier

neatstranger·pal-collar·GPS_Carrier/GPS_Carrier.kicad_pcb

GPS Carrier PCB layout, top view — open source board by neatstranger

About the GPS Carrier PCB

GPS Carrier is an open source PCB design by neatstranger, published on GitHub. It is a 4-layer board measuring 45.7 × 30.5 mm, with 10 components from 9 distinct parts.

Other key parts include the ATGM336H-5N31, AT2659 and BWU.FL-IPEX1. By type, the board carries 3 ICs, 3 capacitors, 2 connectors, 1 inductor and 1 resistor.

It belongs with the rf & radio designs in this gallery.

From the project

Pal collar will use a Lora-Wan base station, and your internet connection to receive the location from your pet within 1 Mile of your home.

Main components on the GPS Carrier

ATGM336H-5N31AT2659BWU.FL-IPEX1

GPS Carrier bill of materials (BOM)

10 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATGM336H-5N31
U1
1
AT2659
U2
1
BWU.FL-IPEX1
U4
2
CONN_01X09_PIN
Conn_01x09_Pin
J1, J2
1
6.8NH
6.8nH
L1
1
10UF
10uF
C1
1
100NF
100nF
C2
1
470PF
470pF
C3
1
1k
R1

GPS Carrier design files

The KiCad project lives in the neatstranger/pal-collar repository on GitHub; these links point at the commit this page was built from.

GPS Carrier: common questions

How big is the GPS Carrier PCB?

The GPS Carrier measures 45.7 × 30.5 mm, has 4 copper layers and is 1.559 mm thick.

How many components are on the GPS Carrier?

10 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the GPS Carrier design files?

From the neatstranger/pal-collar repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the GPS Carrier design in my own project?

The repository has no license, so all rights stay with neatstranger. Use it as a reference, and ask the author before reusing the design.

More boards in pal-collar

Similar boards