Bugboard
NeerajR18·bugboard·PCB/bugboard.kicad_pcb
About the Bugboard PCB
Bugboard is an open source STM32 PCB design by NeerajR18, published on GitHub. It is a 2-layer board measuring 48.2 × 17.1 mm, with 27 components from 14 distinct parts.
Its main chip is the STM32G431CBTx, from the STM32 family. Other key parts include the XC6206PxxxMR. By type, the board carries 12 capacitors, 4 connectors, 4 resistors, 2 ICs, 2 switches and 2 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Development board based on the STM32G431CBT6 (WIP)
Note : - This is still a work in progress.
bugboard is a development board with the STM32G431CBT6 as its core.
This development board is intended to be used in a keyboard PCB.
- STM32G431CBT6 - Built-in USB-C Port - Small size design
A development board is a PCB (Printed Circuit Board) with an MCU along with other components such as a USB port, crystals etc. to make prototyping and designing circuits easier. Since it already has certain components, it can be used directly in many circuits to save cost as well as time. Development boards can vary in size, components, MCU type, amount of…
Main components on the Bugboard
Bugboard bill of materials (BOM)
27 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G431CBTx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | XC6206PxxxMR | SOT-23-3 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 2 | Conn_01x20 | PinHeader_1x20_P2.54mm_Vertical | J3, J4 |
| 1 | 500mA | Fuse_1206_3216Metric | F1 |
| 2 | SW_SPST | SW_SPST_TS-1088-xR020 | SW1, SW2 |
| 1 | BAT54C | SOT-23 | D1 |
| 1 | PRTR5V0U2X | SOT-143 | D2 |
| 2 | 10uF | C_0402_1005Metric | C1, C2 |
| 9 | 100nF | C_0402_1005Metric | C3, C4, C5, C7, C8, C9, C11, C12 +1 |
| 1 | 10uF | C_0603_1608Metric | C6 |
| 2 | 5k1 | R_0402_1005Metric | R1, R2 |
| 2 | 10k | R_0402_1005Metric | R3, R4 |
Bugboard design files
The KiCad project lives in the NeerajR18/bugboard repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/bugboard.kicad_pcb
- SchematicPCB/bugboard.kicad_sch
- BOMbom.csv
Bugboard: common questions
What microcontroller does the Bugboard use?
The Bugboard is built around the STM32G431CBTx, from the STM32 family.
How big is the Bugboard PCB?
The Bugboard measures 48.2 × 17.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bugboard?
27 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bugboard design files?
From the NeerajR18/bugboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Bugboard design in my own project?
The repository has no license, so all rights stay with NeerajR18. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Bugboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k