Riotee CapacitorShield
About the Riotee CapacitorShield PCB
Riotee CapacitorShield is an open source PCB design by NessieCircuits, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 55.9 × 22.9 mm, with 11 components from 7 distinct parts.
By type, the board carries 8 capacitors, 2 connectors and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
The capacitor panel shield plugs into the headers of the Riotee board. It allows flexibly adding more capacitance to your device. An 8-position switch is used to selectively connect additional capacitors ranging from tiny ceramics to large supercapacitors.
The capacitor panel shield plugs into the headers of the Riotee board. It allows flexibly adding more capacitance to your device. An 8-position switch is used to selectively connect additional capacitors ranging from tiny ceramics to large supercapacitors.
- Schematics - Layout - Rendering - Gerber - BOM
Riotee CapacitorShield bill of materials (BOM)
11 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PRT-14322 Conn_01x12 | PinSocket_1x12_P2.54mm_Vertical | J1 |
| 1 | PRT-11376 Conn_01x10 | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | 1-1825058-9 SW_DIP_x08 | TE_1-1825058-9 | SW1 |
| 3 | GRM21BR61A476ME15K 47u | C_0805_2012Metric | C1, C2, C3 |
| 3 | GRM31CR60J227ME11K 220u | C_1206_3216Metric | C4, C5, C6 |
| 1 | FG0H103ZF 10m | KM_FG0H103ZF | C7 |
| 1 | FGH0H224ZF 220m | KM_FG0H103ZF | C8 |
Riotee CapacitorShield design files
The KiCad project lives in the NessieCircuits/Riotee_CapacitorShield repository on GitHub; these links point at the commit this page was built from.
Riotee CapacitorShield: common questions
How big is the Riotee CapacitorShield PCB?
The Riotee CapacitorShield measures 55.9 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Riotee CapacitorShield?
11 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Riotee CapacitorShield design files?
From the NessieCircuits/Riotee_CapacitorShield repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Riotee CapacitorShield design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which NessieCircuits chose for the repository.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979