3d chase
NestOfGhosts·3d-chase·Pcb Files/chase.kicad_pcb
About the 3d chase PCB
3d chase is an open source AVR/Arduino PCB design by NestOfGhosts, published on GitHub. It is a 2-layer board measuring 65.5 × 110 mm, with 23 components from 6 distinct parts.
Its main chip is the ARDUINO_NANO, from the AVR/Arduino family. By type, the board carries 9 connectors, 4 crystals, 3 transistors, 3 inductors and 1 IC.
From the project
3d cube of led's as interface for simple game of snake without the body of the snake
But the cube is 9x9x9 so i dont think the snake's body would work, so it's just going to be a led moving towards blinking leds.
BOM.csv is just a copy of the things I personally had to buy for the project and their prices, not a complete list of things you need.
Additional notes: - I got my pcb and chassis from JLCPCB and JLC3DP (respectively). - Diffused leds work better for this projects, because realistically you're looking at the leds from multiple angles and you will be looking at them for periods of time (diffused spreads light out and reduces sharpness) - Colour of leds correspond to…
Main components on the 3d chase
3d chase bill of materials (BOM)
23 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ARDUINO_NANO | Arduino_Nano | U1 |
| 3 | Q_NMOS | 1x3 1mm diameter through holes | Q1, Q2, Q3 |
| 4 | SW_Push | SW_Cherry_MX_1.00u_PCB | X+1, X-1, Y+1, Y-1 |
| 9 | Conn_01x01_Pin | SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm | P1, P2, P3, P4, P5, P6, P7, P8 +1 |
| 3 | SW_Push | SW_Cherry_MX_1.00u_PCB | PWR1, Z+1, Z-1 |
| 3 | Conn_01x01_Pin | SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm | L1, L2, L3 |
3d chase design files
The KiCad project lives in the NestOfGhosts/3d-chase repository on GitHub; these links point at the commit this page was built from.
- LayoutPcb Files/chase.kicad_pcb
- SchematicPcb Files/chase.kicad_sch
3d chase: common questions
What microcontroller does the 3d chase use?
The 3d chase is built around the ARDUINO_NANO, from the AVR/Arduino family.
How big is the 3d chase PCB?
The 3d chase measures 65.5 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 3d chase?
23 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the 3d chase design files?
From the NestOfGhosts/3d-chase repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 3d chase design in my own project?
The repository has no license, so all rights stay with NestOfGhosts. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 3d chase without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k