HardLabs

Nguy n-Nh t-Khanh-2151097-ESD-E1

nguyennhutkhanhtom·Nguy-n-Nh-t-Khanh-2151097-ESD-E1

Nguy n-Nh t-Khanh-2151097-ESD-E1 PCB layout, top view — open source AVR/Arduino board by nguyennhutkhanhtom

About the Nguy n-Nh t-Khanh-2151097-ESD-E1 PCB

Nguy n-Nh t-Khanh-2151097-ESD-E1 is an open source AVR/Arduino PCB design by nguyennhutkhanhtom, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 17 components from 3 distinct parts.

Its main chip is the Arduino_UNO_R2, from the AVR/Arduino family. By type, the board carries 8 diodes, 8 resistors and 1 module.

Main components on the Nguy n-Nh t-Khanh-2151097-ESD-E1

Arduino_UNO_R2

Nguy n-Nh t-Khanh-2151097-ESD-E1 bill of materials (BOM)

17 components, 3 distinct parts.

QtyPartRefs
1
Arduino_UNO_R2
A1
8
LED
D1, D2, D3, D4, D5, D6, D7, D8
8
247
R1, R2, R3, R4, R5, R6, R7, R8

Nguy n-Nh t-Khanh-2151097-ESD-E1 design files

The KiCad project lives in the nguyennhutkhanhtom/Nguy-n-Nh-t-Khanh-2151097-ESD-E1 repository on GitHub; these links point at the commit this page was built from.

Nguy n-Nh t-Khanh-2151097-ESD-E1: common questions

What microcontroller does the Nguy n-Nh t-Khanh-2151097-ESD-E1 use?

The Nguy n-Nh t-Khanh-2151097-ESD-E1 is built around the Arduino_UNO_R2, from the AVR/Arduino family.

How big is the Nguy n-Nh t-Khanh-2151097-ESD-E1 PCB?

The Nguy n-Nh t-Khanh-2151097-ESD-E1 measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Nguy n-Nh t-Khanh-2151097-ESD-E1?

17 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Nguy n-Nh t-Khanh-2151097-ESD-E1 design files?

From the nguyennhutkhanhtom/Nguy-n-Nh-t-Khanh-2151097-ESD-E1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Nguy n-Nh t-Khanh-2151097-ESD-E1 design in my own project?

The repository has no license, so all rights stay with nguyennhutkhanhtom. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Nguy n-Nh t-Khanh-2151097-ESD-E1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards