HardLabs

Caravel-M.2-card-QFN

nic0villegasc·LushayLabs-TangNano20K·docs/Internship Docs/[Práctica] AC3E Testeo Chip/Caravelm2/caravel-M.2-card-QFN.kicad_pcb

Caravel-M.2-card-QFN PCB layout, top view — open source board by nic0villegasc

About the Caravel-M.2-card-QFN PCB

Caravel-M.2-card-QFN is an open source PCB design by nic0villegasc, published on GitHub. It is a 4-layer board measuring 22 × 22 mm, with 11 components from 3 distinct parts.

Other key parts include the Caravel. By type, the board carries 9 capacitors, 1 IC and 1 connector.

It belongs with the displays & leds and dev boards & breakouts designs in this gallery.

From the project

In this repository I will save all the code that I used to run the LushayLabs examples.

This repository serves as a collection of Verilog/SystemVerilog examples and projects for the Sipeed Tang Nano 20K FPGA development board.

These projects are adaptations of the Lushay Labs Tang Nano 9K tutorials, modified to accommodate the specific pinouts, constraints, and logic levels of the 20K variant. The repository covers practical FPGA implementations ranging from basic logic to complex peripheral drivers (I2C, SPI, UART).

Main components on the Caravel-M.2-card-QFN

Caravel

Caravel-M.2-card-QFN bill of materials (BOM)

11 components, 3 distinct parts.

QtyPartRefs
1
Caravel
U1
1
MICROMOD-2222-Generic
J1
9
0.1uf
C1, C2, C3, C4, C5, C6, C7, C8 +1

Caravel-M.2-card-QFN design files

The KiCad project lives in the nic0villegasc/LushayLabs-TangNano20K repository on GitHub; these links point at the commit this page was built from.

Caravel-M.2-card-QFN: common questions

How big is the Caravel-M.2-card-QFN PCB?

The Caravel-M.2-card-QFN measures 22 × 22 mm, has 4 copper layers and is 0.8 mm thick.

How many components are on the Caravel-M.2-card-QFN?

11 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Caravel-M.2-card-QFN design files?

From the nic0villegasc/LushayLabs-TangNano20K repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Caravel-M.2-card-QFN design in my own project?

The repository has no license, so all rights stay with nic0villegasc. Use it as a reference, and ask the author before reusing the design.

More boards in LushayLabs-TangNano20K

Similar boards