13 open source boards using the Caravel

Real designs built with the Caravel, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the Caravel

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the Caravel connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCD1 pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 22 nF).
  • The VDDIO pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 22 nF).
  • The VCCD pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 22 nF).
  • The VDDA1 pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 22 nF).
VSSA2pin 1Connected to: GND 100%
VDDA2pin 9Connected to: VDDA2 90%
  • Decoupling capacitor on 80% · 100 nF (7), 22 nF (2)
VSSD2pin 10Connected to: GND 100%
VDDIOpin 17, 64Connected to: VDDIO 100%
  • Decoupling capacitor on 90% · 100 nF (9), 22 nF (1)
  • Crystal on 50% · 10 MHz (5)
VCCDpin 18Connected to: 1.8V 100%
  • Decoupling capacitor on 90% · 100 nF (8), 22 nF (1)
N/Cpin 19Connected to: Not connected 100%
VSSApin 20Connected to: GND 100%
CLOCKpin 22Connected to: A connector 90%
  • Crystal on 60% · 10 MHz (5), 15 MHz (1)
VSSDpin 23Connected to: GND 100%
FLASH_CSBpin 24Connected to: TMUX1574DYYR 50%, W25Q32JVSSIQ 50%, a connector 40%
  • Pull-up to VDDIO on 50% · 10 kΩ (5)
FLASH_CLKpin 25Connected to: TMUX1574DYYR 50%, W25Q32JVSSIQ 50%, a connector 40%
  • Pull-up to VDDIO on 50% · 10 kΩ (5)
FLASH_IO0pin 26Connected to: TMUX1574DYYR 50%, W25Q32JVSSIQ 50%, a connector 40%
  • Pull-up to VDDIO on 50% · 10 kΩ (5)
FLASH_IO1pin 27Connected to: TMUX1574DYYR 50%, W25Q32JVSSIQ 50%, a connector 40%
  • Pull-up to VDDIO on 50% · 10 kΩ (5)
VSSIOpin 29, 56Connected to: GND 100%
VDDApin 30Connected to: VDDIO 100%
  • Decoupling capacitor on 80% · 100 nF (7), 22 nF (2)
MPRJ_IO[4]_SCKpin 35Connected to: A connector 88%, FT232H 63%, TMUX1574DYYR 63%
  • Series resistor on 63% · 0 Ω (5)
MPRJ_IO[5]_SER_RXpin 36Connected to: A connector 88%
  • Series resistor on 63% · 0 Ω (5)
VSSA1pin 38, 52Connected to: GND 100%
VSSD1pin 39Connected to: GND 100%
VDDA1pin 40, 47Connected to: VDDA1 89%
  • Decoupling capacitor on 90% · 100 nF (22), 22 nF (2)
VCCD1pin 49Connected to: VCCD1 100%
  • Decoupling capacitor on 100% · 100 nF (9), 22 nF (2)
VCCD2pin 63Connected to: VCCD2 100%
  • Decoupling capacitor on 80% · 100 nF (7), 22 nF (2)
THERMALPADpin 65Connected to: GND 100%

38 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Caravel pcb by efabless, Pyfive mpw1-pcb by PyFive-RISC-V, Caravel pcb by chipfoundry and Caravel pcb by weyer7.

The Caravel in open source designs

The gallery holds 13 open source boards using the Caravel from 10 GitHub repositories; a typical one measures about 54.5 × 52.1 mm and carries around 64 components.

54% are two-layer designs, the rest use four layers or more, and 15% carry an open source license.

The most starred is Caravel pcb by efabless.

What boards using the Caravel are built for

Caravel: common questions

Where can I find a Caravel reference design?

Each of the 13 boards on this page is a real design using the Caravel. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the Caravel VCCD1 pin?

The VCCD1 pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 22 nF). Counted from the KiCad layouts of 10 open source designs using the Caravel.

What decoupling capacitors do designs use on the Caravel VDDIO pin?

The VDDIO pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 22 nF). Counted from the KiCad layouts of 10 open source designs using the Caravel.

What decoupling capacitors do designs use on the Caravel VCCD pin?

The VCCD pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 22 nF). Counted from the KiCad layouts of 10 open source designs using the Caravel.

What parts are used alongside the Caravel?

The 93C56, AZ1117CH-1.8TRG1, FT232H, NCP1117LPST33T3G and SN74LVC1G125DCKT appear in the most repositories here.

How big is a typical board using the Caravel?

The median is 54.5 × 52.1 mm, and 54% are two-layer designs.

What is the most popular open source board using the Caravel?

By GitHub stars, Caravel pcb by efabless, with 40 stars.

Can I simulate one of these boards using the Caravel before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part