VELETA PLACA
About the VELETA PLACA PCB
VELETA PLACA is an open source PCB design by nicolasmino, published on GitHub. It is a 2-layer board measuring 59.9 × 67.4 mm, with 10 components from 7 distinct parts.
By type, the board carries 5 resistors, 4 switches and 1 connector.
It belongs with the iot & wireless designs in this gallery.
VELETA PLACA bill of materials (BOM)
10 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X03 | Pin_Strip_3 | J1 |
| 4 | SW_Reed | SW_SPST_REED_CT10-XXXX-G1 | SW1, SW2, SW3, SW4 |
| 1 | R 33K | RES0.3 | R1 |
| 1 | R 8,2K | RES0.3 | R2 |
| 1 | R 1K | RES0.3 | R3 |
| 1 | R 2,2K | RES0.3 | R4 |
| 1 | R 10K | RES0.3 | R5 |
VELETA PLACA design files
The KiCad project lives in the nicolasmino/EstacionMetereologica repository on GitHub; these links point at the commit this page was built from.
VELETA PLACA: common questions
How big is the VELETA PLACA PCB?
The VELETA PLACA measures 59.9 × 67.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the VELETA PLACA?
10 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the VELETA PLACA design files?
From the nicolasmino/EstacionMetereologica repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the VELETA PLACA design in my own project?
The repository has no license, so all rights stay with nicolasmino. Use it as a reference, and ask the author before reusing the design.
More boards in EstacionMetereologica
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
RPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k
L0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547
Breakout board
26.7 × 27.9 mm29 parts2LMIT547
Stm32f0 disco Luos shield
55.9 × 99.1 mm26 parts2LMIT547
L0 USBA
20.3 × 15.3 mm19 parts2LMIT547