HardLabs

SENSORES METEOROLOGICOS

nicolasmino·EstacionMetereologica·PCB/SENSORES DE ESTACIÓN/SENSORES_METEOROLOGICOS/SENSORES_METEOROLOGICOS.kicad_pcb

SENSORES METEOROLOGICOS PCB layout, top view — open source AVR/Arduino board by nicolasmino

About the SENSORES METEOROLOGICOS PCB

SENSORES METEOROLOGICOS is an open source AVR/Arduino PCB design by nicolasmino, published on GitHub. It is a 2-layer board measuring 40 × 65 mm, with 11 components from 10 distinct parts.

Its main chip is the Arduino_Nano_Header, from the AVR/Arduino family. Other key parts include the L7805. By type, the board carries 7 connectors, 2 capacitors, 1 IC and 1 resistor.

It belongs with the iot & wireless designs in this gallery.

SENSORES METEOROLOGICOS, from the project README
From the project README

Main components on the SENSORES METEOROLOGICOS

L7805

SENSORES METEOROLOGICOS bill of materials (BOM)

11 components, 10 distinct parts.

QtyPartRefs
1
L7805
U1
1
Arduino_Nano_Header
J1
1
Screw_Terminal_01x02
J2
1
MQ2
J3
1
CONN_01X03
J4
1
bme280
J5
1
Conn_01x05
J6
1
Conn_01x04
J7
2
CAPAPOL
C1, C2
1
R
R1

SENSORES METEOROLOGICOS design files

The KiCad project lives in the nicolasmino/EstacionMetereologica repository on GitHub; these links point at the commit this page was built from.

SENSORES METEOROLOGICOS: common questions

What microcontroller does the SENSORES METEOROLOGICOS use?

The SENSORES METEOROLOGICOS is built around the Arduino_Nano_Header, from the AVR/Arduino family.

How big is the SENSORES METEOROLOGICOS PCB?

The SENSORES METEOROLOGICOS measures 40 × 65 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SENSORES METEOROLOGICOS?

11 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the SENSORES METEOROLOGICOS design files?

From the nicolasmino/EstacionMetereologica repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SENSORES METEOROLOGICOS design in my own project?

The repository has no license, so all rights stay with nicolasmino. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SENSORES METEOROLOGICOS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in EstacionMetereologica

Similar boards