HardLabs

PANEL SOLAR Y CONTROL

nicolasmino·EstacionMetereologica·PCB/ALIMENTACION Y CONTROL DE PANEL SOLAR/PANEL SOLAR Y CONTROL/PANEL SOLAR Y CONTROL.kicad_pcb

PANEL SOLAR Y CONTROL PCB layout, top view — open source AVR/Arduino board by nicolasmino

About the PANEL SOLAR Y CONTROL PCB

PANEL SOLAR Y CONTROL is an open source AVR/Arduino PCB design by nicolasmino, published on GitHub. It is a 2-layer board measuring 65 × 70 mm, with 38 components from 19 distinct parts.

Its main chip is the Arduino_Nano_Header, from the AVR/Arduino family. Other key parts include the LM2596S-5 and L7805. By type, the board carries 13 connectors, 12 resistors, 7 capacitors, 3 diodes, 2 ICs and 1 inductor.

It belongs with the power & battery and iot & wireless designs in this gallery.

PANEL SOLAR Y CONTROL, from the project README
From the project README

Main components on the PANEL SOLAR Y CONTROL

LM2596S-5L7805

PANEL SOLAR Y CONTROL bill of materials (BOM)

38 components, 19 distinct parts.

QtyPartRefs
1
LM2596S-5
U1
1
L7805
U2
2
TB_1X2
J1, J14
1
Arduino_Nano_Header
J2
1
SERVO1
J3
1
SERVO2
J4
8
CONN_01X03
J5, J6, J7, J8, J10, J11, J12, J13
2
SS34
D1, D3
1
LED
D2
1
33uH
L1
1
100uf 50V
C1
3
104
C2, C4, C5
1
220uf 35V
C3
2
CAPAPOL
C6, C7
2
102
R1, R3
1
822
R2
1
103
R4
4
LDR03
R5, R6, R7, R8
4
R
R9, R10, R11, R12

PANEL SOLAR Y CONTROL design files

The KiCad project lives in the nicolasmino/EstacionMetereologica repository on GitHub; these links point at the commit this page was built from.

PANEL SOLAR Y CONTROL: common questions

What microcontroller does the PANEL SOLAR Y CONTROL use?

The PANEL SOLAR Y CONTROL is built around the Arduino_Nano_Header, from the AVR/Arduino family.

How big is the PANEL SOLAR Y CONTROL PCB?

The PANEL SOLAR Y CONTROL measures 65 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PANEL SOLAR Y CONTROL?

38 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the PANEL SOLAR Y CONTROL design files?

From the nicolasmino/EstacionMetereologica repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PANEL SOLAR Y CONTROL design in my own project?

The repository has no license, so all rights stay with nicolasmino. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PANEL SOLAR Y CONTROL without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in EstacionMetereologica

Similar boards