Kicad mcp
nikhilrayaprolu·kicad-mcp·designs/rv1106-sbc/rv1106_sbc.kicad_pcb
About the Kicad mcp PCB
Kicad mcp is an open source PCB design by nikhilrayaprolu, published on GitHub. It is a 4-layer board measuring 65 × 50 mm, with 130 components from 50 distinct parts.
Other key parts include the USBLC6-2SC6, TLV62569DBVR, RV1106G3 and W25N01GVZEIG. By type, the board carries 67 capacitors, 36 resistors, 7 ICs, 7 inductors, 6 connectors and 3 diodes.
From the project
Best fully functional and reliable mcp for pcb design ever made!!
LP-1106: Linux SBC on Rockchip RV1106G3 (Cortex-A7, 1 TOPS NPU, 256MB DDR3L in package). USB-C power+OTG, 10/100 Ethernet, SPI NAND boot, microSD, 2-lane MIPI CSI, debug UART, 2x10 GPIO.
65.0 × 50.0 mm, 4 layers, 137 parts, 374 vias. Generated with kicad-mcp.

Main components on the Kicad mcp
Kicad mcp bill of materials (BOM)
130 components, 50 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 4 | TLV62569DBVR TLV62569DBV | SOT-23-5 | U2, U3, U4, U5 |
| 1 | RV1106G3 | QFN-128-1EP_12.3x12.3mm_P0.35mm_EP7x7mm | U10 |
| 1 | W25N01GVZEIG | WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm | U11 |
| 1 | 24MHZ 24MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | DM3AT-SF-PEJM5 | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J3 |
| 1 | HR911105A | RJ45_Hanrun_HR911105A_Horizontal | J4 |
| 1 | FPC 15P 1.0mm | Molex_200528-0150_1x15-1MP_P1.00mm_Horizontal | J5 |
| 1 | DEBUG UART | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | GPIO 2x10 | PinHeader_2x10_P2.54mm_Vertical | J7 |
| 1 | SMD1206P050TF 0.5A PTC | Fuse_1206_3216Metric | F1 |
| 2 | TS-1187A-B-A-B TS-1187A | SW_Push_1P1T_XKB_TS-1187A | SW1, SW2 |
| 1 | MBR230LSFT1G | D_SOD-123F | D1 |
| 1 | green | LED_0603_1608Metric | D2 |
| 1 | blue | LED_0603_1608Metric | D3 |
| 3 | BLM15PD121SN1D 120R@100MHz | L_0402_1005Metric | FB1, FB2, FB3 |
| 1 | CKCS252012 1uH | L_Cenker_CKCS252012 | L1 |
| 3 | CKCS252012 2.2uH | L_Cenker_CKCS252012 | L2, L3, L4 |
| 5 | 22U/10V 22u/10V | C_0805_2012Metric | C1, C5, C9, C14, C18 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 30 | 100N 100n | C_0402_1005Metric | C2, C6, C10, C12, C15, C19, C26, C27 +22 |
| 1 | 2.2U/10V 2.2u/10V | C_0603_1608Metric | C3 |
| 4 | 10U/10V 10u/10V | C_0603_1608Metric | C4, C8, C13, C17 |
| 4 | 22P 22p | C_0402_1005Metric | C7, C11, C16, C20 |
| 7 | 1u | C_0402_1005Metric | C21, C24, C25, C34, C36, C53, C91 |
| 8 | 10U 10u | C_0603_1608Metric | C22, C23, C32, C33, C41, C44, C60, C62 |
| 2 | 18P 18p | C_0402_1005Metric | C54, C55 |
| 3 | 10N 10n | C_0402_1005Metric | C56, C64, C65 |
| 2 | 1n | C_0402_1005Metric | C57, C58 |
| 1 | 1N/2KV 1n/2kV | C_1206_3216Metric | C90 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | 49.9k 1% | R_0402_1005Metric | R3 |
| 4 | 100k 1% | R_0402_1005Metric | R4, R7, R10, R12 |
| 6 | 10K 10k | R_0402_1005Metric | R5, R24, R25, R26, R30, R31 |
| 1 | 124k 1% | R_0402_1005Metric | R6 |
| 1 | 100K 100k | R_0402_1005Metric | R8 |
| 1 | 200k 1% | R_0402_1005Metric | R9 |
| 1 | 453k 1% | R_0402_1005Metric | R11 |
| 1 | 200K 200k | R_0402_1005Metric | R13 |
| 1 | 2.2K 2.2k | R_0402_1005Metric | R14 |
| 1 | 1R | R_0402_1005Metric | R15 |
| 3 | 100R | R_0402_1005Metric | R16, R22, R23 |
| 1 | 240R 1% | R_0402_1005Metric | R17 |
| 1 | 6.04k 1% | R_0402_1005Metric | R18 |
| 4 | 22R | R_0402_1005Metric | R19, R29, R32, R34 |
| 1 | 1M | R_0402_1005Metric | R20 |
| 2 | 1k | R_0402_1005Metric | R21, R28 |
| 1 | 18K 18k | R_0402_1005Metric | R27 |
| 1 | 1M | R_0603_1608Metric | R33 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R35, R36 |
Kicad mcp design files
The KiCad project lives in the nikhilrayaprolu/kicad-mcp repository on GitHub; these links point at the commit this page was built from.
Kicad mcp: common questions
How big is the Kicad mcp PCB?
The Kicad mcp measures 65 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Kicad mcp?
130 components, from 50 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kicad mcp design files?
From the nikhilrayaprolu/kicad-mcp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kicad mcp design in my own project?
The repository has no license, so all rights stay with nikhilrayaprolu. Use it as a reference, and ask the author before reusing the design.