67 open source boards using the TLV62569DBVR

Real designs built with the TLV62569DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

67 boardsClear filters|Most starred

How designs wire the TLV62569DBVR

Read from the KiCad layouts of 49 open source designs, one per repository: what each pin of the TLV62569DBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a inductor on 47 of 49 designs, most often 2.2 µH (then 1 µH).
  • The VIN pin has a decoupling capacitor on 44 of 49 designs, most often 10 µF (then 100 nF).
  • The FB pin has a resistor to GND on 43 of 49 designs, most often 100 kΩ (then 22 kΩ).
  • The FB pin has a pull-up to 3.3V on 35 of 49 designs, most often 100 kΩ (then 453 kΩ).
GNDpin 2Connected to: GND 96%
SWpin 3Connected to: Signal 88%
  • Inductor on 96% · 2.2 µH (36), 1 µH (3), 1.5 µH (2)
VINpin 4Connected to: 5V 73% · a signal 27%
  • Decoupling capacitor on 90% · 10 µF (28), 100 nF (16), 22 µF (14)
FBpin 5Connected to: Signal 88%
  • Resistor to GND on 88% · 100 kΩ (15), 22 kΩ (12), 150 kΩ (3)
  • Pull-up to 3.3V on 71% · 100 kΩ (12), 453 kΩ (12), 680 kΩ (3)
  • Capacitor to the supply on 49% · 6.8 pF (8), 22 pF (6), 10 pF (3)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ulx3s by emard, Clavier by lsartory, Moss by metrox-eth and Ulx5m gs by intergalaktik.

The TLV62569DBVR in open source designs

The gallery holds 67 open source boards using the TLV62569DBVR from 50 GitHub repositories; a typical one measures about 96.1 × 74.5 mm and carries around 161 components.

84% use four copper layers or more, and 34% carry an open source license.

The most starred is Ulx3s by emard.

Microcontrollers on boards using the TLV62569DBVR

TLV62569DBVR: common questions

Where can I find a TLV62569DBVR reference design?

Each of the 67 boards on this page is a real design using the TLV62569DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLV62569DBVR SW pin connected?

The SW pin has a inductor on 47 of 49 designs, most often 2.2 µH (then 1 µH). Counted from the KiCad layouts of 49 open source designs using the TLV62569DBVR.

What decoupling capacitors do designs use on the TLV62569DBVR VIN pin?

The VIN pin has a decoupling capacitor on 44 of 49 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 49 open source designs using the TLV62569DBVR.

What resistor goes on the TLV62569DBVR FB pin?

The FB pin has a resistor to GND on 43 of 49 designs, most often 100 kΩ (then 22 kΩ). Counted from the KiCad layouts of 49 open source designs using the TLV62569DBVR.

What parts are used alongside the TLV62569DBVR?

The USBLC6-2SC6, W25Q128JVSIQ, AP2112K-3.3TRG1, ESP32-P4NRW32X and ESP32-S3-WROOM-1-N16R8 appear in the most repositories here.

Which microcontrollers do boards using the TLV62569DBVR use?

Most are built on ESP32 (23), STM32 (8), RP2040/RP2350 (7) and FPGA (6).

How big is a typical board using the TLV62569DBVR?

The median is 96.1 × 74.5 mm, and 16% are two-layer designs.

What is the most popular open source board using the TLV62569DBVR?

By GitHub stars, Ulx3s by emard, with 470 stars.

Can I simulate one of these boards using the TLV62569DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part