FirstTrace

nikolasbtks·FirstTrace-PCB·hardware/FirstTrace.kicad_pcb

FirstTrace PCB layout, top view — open source STM32 board by nikolasbtks

About the FirstTrace PCB

FirstTrace is an open source STM32 PCB design by nikolasbtks, published on GitHub. It is a 2-layer board measuring 53.9 × 36 mm, with 29 components from 21 distinct parts.

Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the USBLC6-2SC6 and AMS1117-3.3. By type, the board carries 13 capacitors, 5 connectors, 3 ICs, 3 resistors, 1 crystal and 1 fuse.

From the project

An open-source hardware design, built using KiCad, based on STM32F103C8T6 microcontroller.

This project demonstrates a custom 2-layer PCB containing the STM32F103C8T6 microcontroller. This board can be used for embedded development using GPIO and SWD Headers.

1. Microcontroller: STM32F103C8T6 - 20 KB SRAM and 64 KB Flash - 72 MHz clock speed

2. USB Connectivity: - USB Micro-B for data and power - USBLC6-2SC6 for ESD protection

3. Power Supply: AMS1117-3.3 - Voltage regulator for stable 3.3V output

FirstTrace, from the project README
From the project README

Main components on the FirstTrace

FirstTrace bill of materials (BOM)

29 components, 21 distinct parts.

QtyPartRefs
1
STM32F103C8Tx
U1
1
USBLC6-2SC6
U2
1
AMS1117-3.3
U3
1
16MHz
Y1
1
USB_B_Micro
J1
2
Conn_01x04_Pin
J2, J4
1
Conn_01x09_Pin
J3
1
Conn_01x10_Pin
J5
1
500mA
F1
1
SW_SPDT
SW1
1
Green LED
D1
1
FerriteBead
FB1
5
100n
C1, C2, C3, C4, C6
1
4.7u
C5
2
10p
C7, C8
1
10n
C9
2
1u
C10, C11
2
22u
C12, C13
1
10k
R1
1
1k5
R2
Show 1 more
QtyPartRefs
1
100R
R3

FirstTrace design files

The KiCad project lives in the nikolasbtks/FirstTrace-PCB repository on GitHub; these links point at the commit this page was built from.

FirstTrace: common questions

What microcontroller does the FirstTrace use?

The FirstTrace is built around the STM32F103C8Tx, from the STM32 family.

How big is the FirstTrace PCB?

The FirstTrace measures 53.9 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FirstTrace?

29 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the FirstTrace design files?

From the nikolasbtks/FirstTrace-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the FirstTrace design in my own project?

The repository has no license, so all rights stay with nikolasbtks. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FirstTrace without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards