Can distance sensor

nlbutts·can_distance_sensor·electronics/can_distance_sensor.kicad_pcb

Can distance sensor PCB layout, top view — open source STM32 board by nlbutts

About the Can distance sensor PCB

Can distance sensor is an open source STM32 PCB design by nlbutts, published on GitHub under the MIT license. It is a 4-layer board measuring 46 × 30 mm, with 57 components from 32 distinct parts.

Its main chip is the STM32G0B1KBUx, from the STM32 family. Other key parts include the USBLC6-2SC6, L78M05ABDT-TR, TPS7A0508PDBZ, TCAN1044A-Q1 and VL53L3CXV0DH/1. By type, the board carries 18 capacitors, 16 resistors, 8 ICs, 8 diodes, 4 connectors and 1 transistor.

It belongs with the sensors and power & battery designs in this gallery.

From the project

This is a small CAN based Time-of-Flight (TOF) sensor. It determines the distance to an object and sends the resulting message on the CAN bus.

This is a small CAN based Time-of-Flight (TOF) sensor. It determines the distance to an object and sends the resulting message on the CAN bus.

The buck generates 5V which is used for the CAN transceiver. The 5V is fed to two LDO's to generate 3.3V for the processor and 2.8V for the TOF sensor.

There are two status LEDs on the board. An STM32G431 processor powers everything.

Can distance sensor, from the project README
From the project README

Main components on the Can distance sensor

Can distance sensor bill of materials (BOM)

57 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2SC6
U1
1
L78M05ABDT-TR
U2
2
TPS7A0508PDBZ
U3, U4
1
TCAN1044A-Q1
U6
1
VL53L3CXV0DH/1
U7
1
TCA9509DGKR
U8
1
STM32G0B1KBUx
U9
1
AO3401A
Q2
1
Crystal_GND24
Y1
1
Conn_ARM_JTAG_SWD_10
J2
1
Conn_01x04
J3
1
Conn_01x06
J4
1
USB_C_Receptacle
J5
1
PTS645SK50SMTR92LFS
SW1
2
D_Schottky
D1, D5
2
LED
D2, D3
1
D_Zener
D6
3
SP0502BAHT
D7, D8, D9
6
4.7u
C1, C15, C17, C26, C27, C28
6
0.1u
C2, C3, C8, C23, C24, C25
Show 12 more
QtyPartRefs
1
2.2u
C4
2
15p
C9, C10
2
10u
C16, C20
1
1u
C22
2
1K
R2, R6
2
100k
R3, R16
2
22
R4, R5
1
4.7k
R7
2
330
R8, R9
4
10k
R17, R19, R20, R22
1
120
R18
2
2.2k
R21, R23

Can distance sensor design files

The KiCad project lives in the nlbutts/can_distance_sensor repository on GitHub; these links point at the commit this page was built from.

Can distance sensor: common questions

What microcontroller does the Can distance sensor use?

The Can distance sensor is built around the STM32G0B1KBUx, from the STM32 family.

How big is the Can distance sensor PCB?

The Can distance sensor measures 46 × 30 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Can distance sensor?

57 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Can distance sensor design files?

From the nlbutts/can_distance_sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Can distance sensor design in my own project?

Yes, under the terms of its MIT license, which nlbutts chose for the repository.

Can I test firmware for the Can distance sensor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards