12 open source boards using the L78M05ABDT-TR
Real designs built with the L78M05ABDT-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
OpenEFI rev4 bkp
Churrosoft
164 × 118 mm317 parts4LCERN-OHL-S-2.08RP2040/RP2350
Pico-Dev iCE
frohro
100 × 100 mm293 parts4LNo license2STM32
UEFI-v6.x
Churrosoft
116.5 × 98 mm193 parts4LNo license2RP2040/RP2350
Intro to-CAD-2026
frohro
100 × 100 mm316 parts4LNo license1RP2040/RP2350
Rp2040-fan controller
zombienerd
100 × 69.9 mm112 parts2LCC-BY-SA-4.00ESP32
ESP-relay-6ch
koson
173 × 67.8 mm109 parts2LNo license0STM32
Can distance sensor
nlbutts
46 × 30 mm57 parts4LMIT0Cdipannoucer
buelowp
105.7 × 60.2 mm53 parts2LMIT0NXP
Wasabi
PeterRice4
83 × 57.5 mm49 parts2LNo license0Xing Signals XIAO
buelowp
60.3 × 49.5 mm40 parts2LNo license0STM32
OpenEFI rev4
Churrosoft
164 × 118 mm257 parts4LCERN-OHL-S-2.08RP2040/RP2350
Frohne
frohro
100 × 100 mm215 parts4LNo license1
How designs wire the L78M05ABDT-TR
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the L78M05ABDT-TR connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin has a capacitor to GND on 9 of 10 designs, most often 10 µF (then 330 nF).
- The OUT pin is tied to 5V on 6 of 10 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: Signal 60% · 12V 40% |
|
| GNDpin 2 | Connected to: GND 83% · 5V 17% | — |
| OUTpin 3 | Connected to: 5V 60% · a signal 30% | — |
| GND_4pin 4 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenEFI rev4 by Churrosoft, UEFI-v6.x by Churrosoft, Pico-Dev iCE by frohro and Intro to-CAD-2026 by frohro.
The L78M05ABDT-TR in open source designs
The gallery holds 12 open source boards using the L78M05ABDT-TR from 10 GitHub repositories; a typical one measures about 100 × 83.9 mm and carries around 153 components.
58% use four copper layers or more, and 42% carry an open source license.
The most starred is OpenEFI rev4 bkp by Churrosoft.
Parts used alongside the L78M05ABDT-TR
Microcontrollers on boards using the L78M05ABDT-TR
What boards using the L78M05ABDT-TR are built for
L78M05ABDT-TR: common questions
Where can I find a L78M05ABDT-TR reference design?
Each of the 12 boards on this page is a real design using the L78M05ABDT-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L78M05ABDT-TR IN pin connected?
The IN pin has a capacitor to GND on 9 of 10 designs, most often 10 µF (then 330 nF). Counted from the KiCad layouts of 10 open source designs using the L78M05ABDT-TR.
How is the L78M05ABDT-TR OUT pin connected?
The OUT pin is tied to 5V on 6 of 10 designs (a signal on 3). Counted from the KiCad layouts of 10 open source designs using the L78M05ABDT-TR.
What parts are used alongside the L78M05ABDT-TR?
The AMS1117-3.3, BMP280, CJC4334H, LMV324 and MCZ33810EK appear in the most repositories here.
Which microcontrollers do boards using the L78M05ABDT-TR use?
Most are built on RP2040/RP2350 (4), STM32 (4), ESP32 (1) and NXP (1).
How big is a typical board using the L78M05ABDT-TR?
The median is 100 × 83.9 mm, and 42% are two-layer designs.
What is the most popular open source board using the L78M05ABDT-TR?
By GitHub stars, OpenEFI rev4 bkp by Churrosoft, with 8 stars.
Can I simulate one of these boards using the L78M05ABDT-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.