HardLabs

Sgh60

nobodywasishere·mmp·firmware/kicad/sgh60/sgh60/sgh60.kicad_pcb

Sgh60 PCB layout, top view — open source RP2040/RP2350 board by nobodywasishere

About the Sgh60 PCB

Sgh60 is an open source RP2040/RP2350 PCB design by nobodywasishere, published on GitHub. It is a 2-layer board measuring 285 × 94.6 mm, with 155 components from 9 distinct parts.

Its main chip is the RP2040-Zero_reverse_for_sgh60, from the RP2040/RP2350 family. By type, the board carries 79 diodes, 69 switches and 2 ICs.

It belongs with the keyboards designs in this gallery.

From the project

TinyGo 0.29 or later is required to build tinygo-keyboard 0.2.0

TinyGo 0.29 or later is required to build tinygo-keyboard 0.2.0

key input squared matrix scan matrix scan duplex-matrix scan rotary encoder GPIO UART Shifter (tinygo.org/x/drivers/shifter) layer feature by mod key mouse click / mouse wheel support TRRS (UART) support Vial Keymap / Layers Matrix testers

The following microcontrollers are supported.

files ./kicad/sgkb for KiCad 7.0 KiCanvas : sgkb-0.4.0 left KiCanvas : sgkb-0.4.0 right KiCanvas : sgkb-0.3.0 left KiCanvas : sgkb-0.3.0 right

Sgh60, from the project README
From the project README

Sgh60 bill of materials (BOM)

155 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
1
~
U2
3
MountingHole
H1, H2, H3
2
MountingHole
H4, H5
67
SW_PUSH
S0, S1, S2, S3, S4, S5, S6, S7 +59
1
SW_PUSH
S28
1
SW_PUSH
S42
16
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +8
63
1N4148
D17, D18, D19, D20, D21, D22, D23, D24 +55

Sgh60 design files

The KiCad project lives in the nobodywasishere/mmp repository on GitHub; these links point at the commit this page was built from.

Sgh60: common questions

What microcontroller does the Sgh60 use?

The Sgh60 is built around the RP2040-Zero_reverse_for_sgh60, from the RP2040/RP2350 family.

How big is the Sgh60 PCB?

The Sgh60 measures 285 × 94.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sgh60?

155 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sgh60 design files?

From the nobodywasishere/mmp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Sgh60 design in my own project?

The repository has no license, so all rights stay with nobodywasishere. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Sgh60 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in mmp

Similar boards