HardLabs

LCD Module

NorthCoastModularCollective·BridgeSystemOnRampPrototype·hardware/LCD Module/LCD Module/LCD Module.kicad_pcb

LCD Module layout, top view — open source board by NorthCoastModularCollective

About the LCD Module

LCD Module is an open source PCB design by NorthCoastModularCollective, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 53.3 × 32.2 mm, with 11 components from 4 distinct parts.

By type, the board carries 8 capacitors, 1 connector and 1 resistor.

It belongs with the audio and displays & leds designs in this gallery.

From the project

a pure data prototype for the bridge system on ramp

This folder contains the designs for PCBs, panels, and other hardware items for the Bridge System Onramp.

Pinout map for v1 hardware |Pin| MIDI CC | Component| |----|-----------|----------| |0| N/A | Decay Input Jack | |1| N/A | MISO (LCD Screen)| |2| 17 | Trigger Button| |3| N/A| SRR (shaper) Input Jack | |4| N/A | Filter Cutoff Input Jack | |5| N/A | Envelope Attack Input Jack | |6| N/A| Waveform Selector Input Jack | |7| N/A | DIN (SGTL5000 Audio Chip)| |8| N/A | DOUT (SGTL5000 Audio Chip)| |9| N/A | Clock Output Jack| |10| N/A | Trigger Output Jack| |11| N/A | MOSI (LCD Screen)| |12| N/A…

LCD Module bill of materials (BOM)

11 components, 4 distinct parts.

QtyPartRefs
1
Conn_02x04_Counter_Clockwise
J1
1
NHD-C12832A1Z-FSW-FBW-3V3
LCDScreen1
8
1uF
C1, C2, C3, C4, C5, C6, C7, C8
1
330
R1

LCD Module design files

The KiCad project lives in the NorthCoastModularCollective/BridgeSystemOnRampPrototype repository on GitHub; these links point at the commit this page was built from.

LCD Module: common questions

How big is the LCD Module?

The LCD Module measures 53.3 × 32.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LCD Module?

11 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the LCD Module design files?

From the NorthCoastModularCollective/BridgeSystemOnRampPrototype repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LCD Module design in my own project?

Yes, under the terms of its GPL-3.0 license, which NorthCoastModularCollective chose for the repository.

More boards in BridgeSystemOnRampPrototype

Similar boards