Mux Module CD74HCT4067M
About the Mux Module CD74HCT4067M
Mux Module CD74HCT4067M is an open source NXP PCB design by NorthCoastModularCollective, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 45.7 × 73.7 mm, with 4 components from 4 distinct parts.
Its main chip is the Teensy4.1, from the NXP family. Other key parts include the CD74HCT4067M. By type, the board carries 2 ICs, 1 connector and 1 resistor.
It belongs with the audio designs in this gallery.
From the project
a pure data prototype for the bridge system on ramp
This folder contains the designs for PCBs, panels, and other hardware items for the Bridge System Onramp.
Pinout map for v1 hardware |Pin| MIDI CC | Component| |----|-----------|----------| |0| N/A | Decay Input Jack | |1| N/A | MISO (LCD Screen)| |2| 17 | Trigger Button| |3| N/A| SRR (shaper) Input Jack | |4| N/A | Filter Cutoff Input Jack | |5| N/A | Envelope Attack Input Jack | |6| N/A| Waveform Selector Input Jack | |7| N/A | DIN (SGTL5000 Audio Chip)| |8| N/A | DOUT (SGTL5000 Audio Chip)| |9| N/A | Clock Output Jack| |10| N/A | Trigger Output Jack| |11| N/A | MOSI (LCD Screen)| |12| N/A…
Main components on the Mux Module CD74HCT4067M
Mux Module CD74HCT4067M bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CD74HCT4067M | SOIC127P1030X265-24N | IC1 |
| 1 | Teensy4.1 | Teensy41 | U1 |
| 1 | Conn_01x17_Socket | PinSocket_1x17_P2.54mm_Vertical | J2 |
| 1 | B10k | EVUFXL | R1 |
Mux Module CD74HCT4067M design files
The KiCad project lives in the NorthCoastModularCollective/BridgeSystemOnRampPrototype repository on GitHub; these links point at the commit this page was built from.
Mux Module CD74HCT4067M: common questions
What microcontroller does the Mux Module CD74HCT4067M use?
The Mux Module CD74HCT4067M is built around the Teensy4.1, from the NXP family.
How big is the Mux Module CD74HCT4067M?
The Mux Module CD74HCT4067M measures 45.7 × 73.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mux Module CD74HCT4067M?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mux Module CD74HCT4067M design files?
From the NorthCoastModularCollective/BridgeSystemOnRampPrototype repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mux Module CD74HCT4067M design in my own project?
Yes, under the terms of its GPL-3.0 license, which NorthCoastModularCollective chose for the repository.
Can I test firmware for the Mux Module CD74HCT4067M without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in BridgeSystemOnRampPrototype
NXPBridge System On Ramp
266.4 × 221.8 mm61 parts2LGPL-3.00
NXPEuro Power CV Shield
55.9 × 63.5 mm32 parts2LGPL-3.00
Audio Module
21.5 × 33.1 mm19 parts2LGPL-3.00
LCD Module
53.3 × 32.2 mm11 parts2LGPL-3.00
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532