FuncGen
NotoFederico·FuncGen·FuncGen_Amplifier/FuncGen[Amplifier v.1.2]/Amplificador.kicad_pcb
About the FuncGen PCB
FuncGen is an open source PCB design by NotoFederico, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 150 × 100 mm, with 46 components from 19 distinct parts.
Other key parts include the TL072 and CD4051B. By type, the board carries 27 resistors, 5 ICs, 4 connectors, 4 diodes, 3 capacitors and 1 transistor.
It belongs with the iot & wireless and test & measurement designs in this gallery.
From the project
A WiFi function and arbitrary wave generator
The present project aims to develop a function generator, which is exactly what its name implies: a test equipment that generates electrical signals in the form of waves that are used as stimuli for electronic measurements.
Most circuits require some type of input signal whose amplitude varies with time. The signal can be an alternating current signal (with peaks that oscillate above and below a reference) or it can vary over a range of direct current offset voltages, either positive or negative. It can be a sine wave or other analog function, a digital pulse, a binary pattern, or a purely…

Main components on the FuncGen
FuncGen bill of materials (BOM)
46 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | TL072 | DIP-8_W7.62mm_LongPads | U1, U2, U4, U5 |
| 1 | CD4051B | DIP-16_W7.62mm_LongPads | U3 |
| 1 | BF245B | TO-92L_Inline_Wide | Q1 |
| 1 | Screw_Terminal_01x05 | Altech_AK300_1x05_P5.00mm_45-Degree | J1 |
| 2 | Conn_01x03_Male | PinSocket_1x03_P2.54mm_Vertical | J2, J3 |
| 1 | Conn_01x02_Male | PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | 10k | Potentiometer_Alps_RK163_Single_Horizontal | RV1 |
| 1 | 100k | Potentiometer_Alps_RK163_Dual_Horizontal | RV2 |
| 2 | D_Zener | D_DO-15_P10.16mm_Horizontal | D1, D2 |
| 2 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D3, D4 |
| 1 | 100n | C_Rect_L9.0mm_W2.5mm_P7.50mm_MKT | C1 |
| 2 | 100nF | C_Rect_L9.0mm_W2.5mm_P7.50mm_MKT | C2, C3 |
| 2 | 8.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3 |
| 2 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4 |
| 15 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R8, R9, R11, R12, R13, R17 +7 |
| 1 | 5.6k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 3 | 33k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R14, R15 |
| 2 | 3.3k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16, R23 |
| 2 | 2.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R19, R25 |
FuncGen design files
The KiCad project lives in the NotoFederico/FuncGen repository on GitHub; these links point at the commit this page was built from.
FuncGen: common questions
How big is the FuncGen PCB?
The FuncGen measures 150 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FuncGen?
46 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the FuncGen design files?
From the NotoFederico/FuncGen repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the FuncGen design in my own project?
Yes, under the terms of its GPL-3.0 license, which NotoFederico chose for the repository.
Similar boards
LevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kStm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547