27 open source boards using the CD4051B

Real designs built with the CD4051B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

27 boardsClear filters|Most starred

How designs wire the CD4051B

Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the CD4051B connects to, and the resistors, capacitors and other passives placed on it.

  • The INH pin is tied to GND on 20 of 23 designs (a signal on 2).
  • The VEE pin is tied to GND on 17 of 23 designs (not connected on 2, a signal on 3).
  • The VDD pin has a decoupling capacitor on 14 of 22 designs, most often 100 nF.
INHpin 6Connected to: GND 87%
VEEpin 7Connected to: GND 74%
VSSpin 8Connected to: GND 96%
VDDpin 16Connected to: 3.3V 100%
  • Decoupling capacitor on 64% · 100 nF (13)

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Autopatzer by jes, Dspod cv1800b by emeb, Quadulator by GlobalSequence and Iosefka motherboard by GlobalSequence.

The CD4051B in open source designs

The gallery holds 27 open source boards using the CD4051B from 25 GitHub repositories; a typical one measures about 141.9 × 100 mm and carries around 121 components.

73% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is Autopatzer by jes.

Microcontrollers on boards using the CD4051B

CD4051B: common questions

Where can I find a CD4051B reference design?

Each of the 27 boards on this page is a real design using the CD4051B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CD4051B INH pin connected?

The INH pin is tied to GND on 20 of 23 designs (a signal on 2). Counted from the KiCad layouts of 23 open source designs using the CD4051B.

How is the CD4051B VEE pin connected?

The VEE pin is tied to GND on 17 of 23 designs (not connected on 2, a signal on 3). Counted from the KiCad layouts of 23 open source designs using the CD4051B.

What decoupling capacitors do designs use on the CD4051B VDD pin?

The VDD pin has a decoupling capacitor on 14 of 22 designs, most often 100 nF. Counted from the KiCad layouts of 23 open source designs using the CD4051B.

What parts are used alongside the CD4051B?

The TL072, AMS1117-3.3, MCP6004, 74HC595 and Electrosmith_Daisy_Seed_Rev4 appear in the most repositories here.

Which microcontrollers do boards using the CD4051B use?

Most are built on RP2040/RP2350 (6), ESP32 (3), RISC-V (2) and STM32 (2).

How big is a typical board using the CD4051B?

The median is 141.9 × 100 mm, and 73% are two-layer designs.

What is the most popular open source board using the CD4051B?

By GitHub stars, Autopatzer by jes, with 31 stars.

Can I simulate one of these boards using the CD4051B before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part