Makerfaire shield
novaksta·makerfaire-shield·pcb/gameshield-v2.kicad_pcb
About the Makerfaire shield
Makerfaire shield is an open source PCB design by novaksta, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 53.5 mm, with 31 components from 10 distinct parts.
By type, the board carries 13 resistors, 6 connectors, 6 switches and 6 capacitors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
It is intended for MakeCode Arcade as F4 target (see available material on (https://arcade.makecode.com/hardware/adding) if you wish to customize),
It is intended for MakeCode Arcade as F4 target (see available material on (https://arcade.makecode.com/hardware/adding) if you wish to customize),
Available are bootloader firmware binaries
There is available kicad project for the board in pcb foler (including gerbers with BOM in jlcpcb-friendly format).
There are available workshop slides for Maker Faire in Prague 2026 (in czech language) that describes "getting started" process.

Makerfaire shield bill of materials (BOM)
31 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Conn_01x11_Socket | PinHeader_1x11_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 6 | SW_Push | SW_Push_1P1T_XKB_TS-1187A | SW1, SW2, SW3, SW4, SW5, SW6 |
| 6 | 104 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 6 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R6, R8, R10, R12 |
| 7 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R7, R9, R11, R13 |
Makerfaire shield design files
The KiCad project lives in the novaksta/makerfaire-shield repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/gameshield-v2.kicad_pcb
- Schematicpcb/gameshield-v2.kicad_sch
Makerfaire shield: common questions
How big is the Makerfaire shield?
The Makerfaire shield measures 100 × 53.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Makerfaire shield?
31 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Makerfaire shield design files?
From the novaksta/makerfaire-shield repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Makerfaire shield design in my own project?
Yes, under the terms of its MIT license, which novaksta chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979