Drop-Ceiling-Controller
npuckett·Drop-Ceiling-Controller·hardwareComponents/drop-ceiling-smd/drop-ceiling-smd.kicad_pcb
About the Drop-Ceiling-Controller PCB
Drop-Ceiling-Controller is an open source PCB design by npuckett, published on GitHub. It is a 2-layer board measuring 146 × 110 mm, with 74 components from 21 distinct parts.
Other key parts include the DAC6578xPW, TLV274CPWR, AP63205WU, Adafruit_Feather_Generic and Adafruit_Ethernet_FeatherWing. By type, the board carries 28 resistors, 19 capacitors, 10 connectors, 9 diodes, 4 ICs and 2 modules.
From the project
An 8-channel ArtNet to 0-10V converter for controlling drop ceiling lighting fixtures. Receives DMX values (0-255) over wired Ethernet using the ArtNet protocol and outputs corresponding 0-10V analog control voltages.
An 8-channel ArtNet to 0-10V converter for controlling drop ceiling lighting fixtures. Receives DMX values (0-255) over wired Ethernet using the ArtNet protocol and outputs corresponding 0-10V analog control voltages.
ArtNet is a protocol for transmitting DMX512 lighting data over Ethernet using UDP on port 6454. This project uses three ArtNet packet types:
Carries DMX channel data from the controller to the ESP32.
Main components on the Drop-Ceiling-Controller
Drop-Ceiling-Controller bill of materials (BOM)
74 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DAC6578xPW | TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 2 | TLV274CPWR | PW14 | U2, U3 |
| 1 | AP63205WU | TSOT-23-6 | U4 |
| 1 | Adafruit_Feather_Generic | Adafruit_Feather | A1 |
| 1 | Adafruit_Ethernet_FeatherWing | Adafruit_Feather | A2 |
| 1 | 12V IN | BarrelJack_CUI_PJ-102AH_Horizontal | J1 |
| 8 | Conn_01x02 | TerminalBlock_CUI_TB007-508-02_1x02_P5.08mm_Horizontal | J2, J3, J4, J5, J6, J7, J8, J9 |
| 1 | Conn_02x10_Counter_Clockwise | PinHeader_2x10_P2.54mm_Vertical | J10 |
| 8 | D_Zener | D_SOD-323_HandSoldering | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | D_Schottky | D_SMA_Handsoldering | D9 |
| 1 | BLM21PG121SN1D | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1 |
| 1 | 4.7uH | ETQ-P3M_KVP | L1 |
| 3 | 10uF | C_0805_2012Metric | C1, C14, C17 |
| 12 | 0.1uF | R_0603_1608Metric | C2, C3, C5, C6, C7, C8, C9, C10 +4 |
| 1 | 1uF | R_0603_1608Metric | C4 |
| 2 | 22uF | C_1206_3216Metric | C15, C16 |
| 1 | 100uF | CP_Elec_8x10.5 | C19 |
| 3 | 4.7K | R_0603_1608Metric | R1, R2, R3 |
| 9 | 10K | R_0603_1608Metric | R4, R5, R7, R11, R14, R17, R18, R27 +1 |
| 8 | 20K | R_0603_1608Metric | R6, R8, R12, R15, R19, R20, R25, R26 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | 100R | C_0805_2012Metric | R9, R10, R13, R16, R21, R22, R23, R24 |
Drop-Ceiling-Controller design files
The KiCad project lives in the npuckett/Drop-Ceiling-Controller repository on GitHub; these links point at the commit this page was built from.
Drop-Ceiling-Controller: common questions
How big is the Drop-Ceiling-Controller PCB?
The Drop-Ceiling-Controller measures 146 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Drop-Ceiling-Controller?
74 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Drop-Ceiling-Controller design files?
From the npuckett/Drop-Ceiling-Controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Drop-Ceiling-Controller design in my own project?
The repository has no license, so all rights stay with npuckett. Use it as a reference, and ask the author before reusing the design.