HardLabs

AlarmSimple.kicad

ntchris·arduino·alarmSimple/hardware/alarmSimple/alarmSimple.kicad_pcb.kicad_pcb

AlarmSimple.kicad PCB layout, top view — open source AVR/Arduino board by ntchris

About the AlarmSimple.kicad PCB

AlarmSimple.kicad is an open source AVR/Arduino PCB design by ntchris, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 70 × 52.4 mm, with 29 components from 20 distinct parts.

Its main chip is the ARDUINO_PRO_MINI, from the AVR/Arduino family. Other key parts include the chargeBoostBoard and AMS1117-5.0. By type, the board carries 13 capacitors, 5 resistors, 3 switches, 2 ICs, 2 connectors and 1 transistor.

Main components on the AlarmSimple.kicad

chargeBoostBoardAMS1117-5.0

AlarmSimple.kicad bill of materials (BOM)

29 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
chargeBoostBoard
U1
1
AMS1117-5.0
U2
1
SS8550
AO3402_N_Mosfet
Q1
1
HDR2X5
Batt
J1
1
1981584-1
Conn_01x04_Male
J2
1
ARDUINO_PRO_MINI
B1
1
Buzzer
BZ1
2
MOMENTARY-SWITCH-SPST-PTH-6.0MM
S1, S3
1
SWITCH-SPDT-PTH-11.6X4.0MM-KIT
S2
1
LED3MM
D1
1
22PF
20UF-0805-10V-10%
C1
1
22PF
10UF-0805-10V-10%
C2
1
10UF
100nf
C3
4
220uf_227A
C4, C9, C12, C13
5
10UF-0805-10V-10%
C5, C7, C8, C10, C11
1
100nf
C6
2
1.1KOHM
6.4k
R1, R2
1
1.1KOHM
100R
R3
1
1.1KOHM
600R
R4
1
1.1KOHM
10kR
R5

AlarmSimple.kicad design files

The KiCad project lives in the ntchris/arduino repository on GitHub; these links point at the commit this page was built from.

AlarmSimple.kicad: common questions

What microcontroller does the AlarmSimple.kicad use?

The AlarmSimple.kicad is built around the ARDUINO_PRO_MINI, from the AVR/Arduino family.

How big is the AlarmSimple.kicad PCB?

The AlarmSimple.kicad measures 70 × 52.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AlarmSimple.kicad?

29 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AlarmSimple.kicad design files?

From the ntchris/arduino repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the AlarmSimple.kicad design in my own project?

Yes, under the terms of its GPL-3.0 license, which ntchris chose for the repository.

Can I test firmware for the AlarmSimple.kicad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in arduino

Similar boards