Smt oven 120AC
About the Smt oven 120AC PCB
Smt oven 120AC is an open source AVR/Arduino PCB design by ntchris, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 48.9 × 49.5 mm, with 28 components from 22 distinct parts.
Its main chip is the Arduino_Nano_v2.x, from the AVR/Arduino family. By type, the board carries 12 capacitors, 6 connectors, 6 resistors, 2 diodes, 1 module and 1 speaker.
Main components on the Smt oven 120AC
Smt oven 120AC bill of materials (BOM)
28 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Arduino_Nano_v2.x | Arduino_Nano_order | a1 |
| 1 | HDR2X5 Conn_01x02_Male | Molex_KK-254_1x02_P2.54mm_Vertical_order | J1 |
| 1 | 1981584-1 Conn_01x03 | Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J2 |
| 1 | HDR1X3 XH2.54_1X04_RotaryEnc | JST_XH_1x04_P2.54mm_Vertical | J3 |
| 1 | LCD_JST_2.54_1X04 | Molex_KK-254_1x04_P2.54mm_Vertical_order | J4 |
| 1 | RGB Conn_01x04 | Molex_KK-254_1x04_P2.54mm_Vertical_order | J5 |
| 1 | Thermo JST_2.54_1X02 | Molex_KK-254_1x02_P2.54mm_Vertical_order | J6 |
| 1 | Speaker | Buzzer_12x9.5RM7.6 | LS1 |
| 1 | SS12 | D_SMA_Handsoldering | D1 |
| 1 | LED | LED_D3.0mm | D2 |
| 1 | 22PF 47uf | R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | C1 |
| 1 | 22PF 100nf | R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | C2 |
| 1 | 10UF 47uf | R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | C3 |
| 1 | 220uf | CP_EIA-7343-20_Kemet-V_Pad2.25x2.55mm_HandSolder | C4 |
| 2 | 330uf | CP_EIA-7343-20_Kemet-V_Pad2.25x2.55mm_HandSolder | C5, C11 |
| 3 | 100nf | R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | C6, C7, C9 |
| 2 | 47uf | R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | C8, C10 |
| 1 | 1nf | R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | C12 |
| 1 | 1.1KOHM 3k | R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R1 |
| 3 | 1.1KOHM 4.7k | R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R2, R3, R4 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1.1KOHM 120 | R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R5 |
| 1 | 1.1KOHM 100k | R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R6 |
Smt oven 120AC design files
The KiCad project lives in the ntchris/arduino repository on GitHub; these links point at the commit this page was built from.
Smt oven 120AC: common questions
What microcontroller does the Smt oven 120AC use?
The Smt oven 120AC is built around the Arduino_Nano_v2.x, from the AVR/Arduino family.
How big is the Smt oven 120AC PCB?
The Smt oven 120AC measures 48.9 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smt oven 120AC?
28 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Smt oven 120AC design files?
From the ntchris/arduino repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Smt oven 120AC design in my own project?
Yes, under the terms of its GPL-3.0 license, which ntchris chose for the repository.
Can I test firmware for the Smt oven 120AC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in arduino
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k