CircuitRust
About the CircuitRust PCB
CircuitRust is an open source AVR/Arduino PCB design by NTDD-code, published on GitHub under the MIT license. It is a board, with 16 components from 12 distinct parts.
Its main chip is the ArduinoUno, from the AVR/Arduino family. Other key parts include the MPU6050, DHT22 and LevelShifter. By type, the board carries 5 ICs, 4 capacitors, 2 diodes, 2 resistors, 1 transistor and 1 buzzer.
From the project
A Rust-based DSL engine for electronic circuit design, safety validation, and professional KiCad netlist export.
CircuitRust is a high-integrity Hardware Description DSL that revolutionizes circuit design. It shifts the workflow from error-prone "drag-and-drop" interfaces to a Code-First paradigm where strict electrical rules and safety checks are enforced at compile-time—just like Rust enforces memory safety.
1. Define your circuit in CircuitRust DSL 2. Compile & verify — automatic electrical safety checks 3. Export as KiCad — .net netlist for professional PCB design 4. Manufacture — no surprises, no smoke tests needed!
Main components on the CircuitRust
CircuitRust bill of materials (BOM)
16 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ArduinoUno | Arduino_UNO_R3 | MCU1 |
| 1 | MPU6050 | PinHeader_1x06_P2.54mm_Vertical | U1 |
| 1 | DHT22 | PinHeader_1x04_P2.54mm_Vertical | U2 |
| 2 | LevelShifter | PinHeader_1x05_P2.54mm_Vertical | U3, U4 |
| 1 | 2N2222 | TO-92_Inline | Q1 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Ultrasonic | PinHeader_1x04_P2.54mm_Vertical | US1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | Diode | D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 4 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1000 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
CircuitRust design files
The KiCad project lives in the NTDD-code/CircuitRust repository on GitHub; these links point at the commit this page was built from.
CircuitRust: common questions
What microcontroller does the CircuitRust use?
The CircuitRust is built around the ArduinoUno, from the AVR/Arduino family.
How many components are on the CircuitRust?
16 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the CircuitRust design files?
From the NTDD-code/CircuitRust repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the CircuitRust design in my own project?
Yes, under the terms of its MIT license, which NTDD-code chose for the repository.
Can I test firmware for the CircuitRust without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k