27 open source boards using the DHT22
Real designs built with the DHT22, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
M19O2
MakersAsylumIndia
28 × 13 mm4 parts2LMIT68ESP32
ClimateSprinklerController
kbx81
217 × 108 mm189 parts2LNo license55ESP32
Aqm envcity hw
MateusMaruzka
100 × 100 mm132 parts2LNo license2ESP32
Smart soja
virgile-tchidehou
219.6 × 144.8 mm77 parts2LMIT1AVR/Arduino
Gas sensor
Hackuarium
100 × 100 mm32 parts2LNo license1Raspberry Pi
SmartClockPi
QinCai-rui
94.5 × 67.1 mm22 parts2LGPL-3.01AVR/Arduino
Wordclock
maelgui
221 × 221 mm153 parts2LNo license0Dlr carrier
arcnode-io
120 × 105 mm89 parts4LNo license0STM32
Stm32Co2
t3ry4git
100 × 100 mm60 parts2LMIT0ESP32
Medivault
chislonljoseph
98.5 × 47 mm32 parts2LNo license0BRD2
mFulmini
81 × 95.7 mm21 parts2LNo license0ESP32
498R design
Mostakim52
55.5 × 76.3 mm13 parts2LMIT0ESP8266
Esp12-environment sensor
hpbock
42.9 × 18.5 mm11 parts2LMIT0Raspberry Pi
Gpio-Hat-Pi
Sadrita404
38.7 × 17.8 mm9 parts2LMIT0Raspberry Pi
Raspberry-PI-HAT
gathonjia-ndungu
28.2 × 18.8 mm8 parts2LNo license0ESP32
WeatherSensor
d3wzs
120 × 60 mm7 parts2LNo license0- schematic only · 16 partsAVR/Arduino
CircuitRust
NTDD-code
16 partsMIT0 ESP32
BRD3
mFulmini
90 × 70 mm18 parts2LNo license0Raspberry Pi
Raspberry Pi Full Stack HAT
Ikarthikmb
24 × 27.9 mm9 parts2LNo license9AVR/Arduino
Stardust
simle-stardust
115 × 75 mm30 parts2LMIT0Sensor
simle-stardust
51.7 × 68.4 mm25 parts2LMIT0Raspberry Pi
RaspberryPiFullStackHAT
CrtomirJuren
28.2 × 17.9 mm9 parts2LNo license0AVR/Arduino
Jarduino2 - Carte Power Nano Autonome
bpmine
118 × 95 mm38 parts2LNo license0Sensor
BrunoRicci
15.3 × 40 mm5 parts2LGPL-2.00Sensor PCB bckp
BrunoRicci
15.3 × 40 mm5 parts2LGPL-2.00Sensor PCB PANELIZED
BrunoRicci
15.3 × 40 mm5 parts2LGPL-2.00Raspberry Pi
Raspberrypi hat
AronAyub
27 × 18.8 mm9 parts2LNo license6
How designs wire the DHT22
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the DHT22 connects to, and the resistors, capacitors and other passives placed on it.
- The DATA pin has a pull-up to 3.3V on 14 of 22 designs, most often 10 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 95% | — |
| DATApin 2 | Connected to: A connector 45%, the microcontroller 41% |
|
| NCpin 3 | Connected to: Not connected 95% | — |
| GNDpin 4 | Connected to: GND 95% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include M19O2 by MakersAsylumIndia, ClimateSprinklerController by kbx81, Raspberry Pi Full Stack HAT by Ikarthikmb and Raspberrypi hat by AronAyub.
The DHT22 in open source designs
The gallery holds 27 open source boards using the DHT22 from 23 GitHub repositories; a typical one measures about 85.5 × 67.7 mm and carries around 18 components.
96% are two-layer designs, the rest use four layers or more, and 48% carry an open source license.
The most starred is M19O2 by MakersAsylumIndia.
Parts used alongside the DHT22
Microcontrollers on boards using the DHT22
What boards using the DHT22 are built for
DHT22: common questions
Where can I find a DHT22 reference design?
Each of the 27 boards on this page is a real design using the DHT22. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the DHT22 DATA pin?
The DATA pin has a pull-up to 3.3V on 14 of 22 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 22 open source designs using the DHT22.
What parts are used alongside the DHT22?
The AP2112K-3.3, ATMEGA328P-AU, DS18B20, MT3608 and TP4056 appear in the most repositories here.
Which microcontrollers do boards using the DHT22 use?
Most are built on ESP32 (7), Raspberry Pi (6), AVR/Arduino (5) and ESP8266 (1).
How big is a typical board using the DHT22?
The median is 85.5 × 67.7 mm, and 96% are two-layer designs.
What is the most popular open source board using the DHT22?
By GitHub stars, M19O2 by MakersAsylumIndia, with 68 stars.
Can I simulate one of these boards using the DHT22 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.