SchematicShieldPLC V0.3
About the SchematicShieldPLC V0.3 PCB
SchematicShieldPLC V0.3 is an open source AVR/Arduino PCB design by nxvxr14, published on GitHub. It is a 2-layer board measuring 118.5 × 80.9 mm, with 19 components from 18 distinct parts.
Its main chip is the ARDUINO_MEGA2560_R3_SHIELD, from the AVR/Arduino family. By type, the board carries 15 connectors, 3 switches and 1 module.
From the project
IMPLEMENTACIÓN DE UN SISTEMA PARA CONTROL DE SUPERVISIÓN Y ADQUISICIÓN DE DATOS DE LA CELDA MECATRÓNICA DE FISCHERTECHNIK DEL LABORATORIO DE AUTOMATIZACIÓN UTILIZANDO HARDWARE Y SOFTWARE LIBRE
3D: Archivos .STL de componentes electrónicos no incluidos en las librerías de KiCad. Datasheets: Documentos en formato .pdf de las especificaciones de los distintos componentes utilizados en las tarjetas. Esquemáticos de referencia: Documentos .pdf con los esquemáticos de algunas tarjetas Arduino. Esquemáticos finales PDF: Documentos .pdf con los esquemáticos definitivos de las tarjetas del proyecto. Huellas y símbolos: Archivos de componentes necesarios que no se encuentran en las librerías nativas de KiCad. Imágenes: Archivos .PNG con las vistas 3D de las tarjetas. *PCB Designs: Incluye…
Main components on the SchematicShieldPLC V0.3
SchematicShieldPLC V0.3 bill of materials (BOM)
19 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ARDUINO_MEGA2560_R3_SHIELD Arduino_Mega2560_R3_Shield | Arduino_Mega2560_R3_Shield | A1 |
| 2 | MOTOROUTPUTFROMMEGA_CONN_02X03_ODD_EVEN MotorOutputFromMega_Conn_02x03_Odd_Even | PinSocket_2x03_P2.54mm_Vertical | J1, J2 |
| 1 | DIGITALINPUTTOMEGA_CONN_02X03_ODD_EVEN digitalInputToMega_Conn_02x03_Odd_Even | PinSocket_2x03_P2.54mm_Vertical | J3 |
| 1 | DIGITALOUTPUTFROMMEGA_CONN_02X02_ODD_EVEN digitalOutputFromMega_Conn_02x02_Odd_Even | PinSocket_2x02_P2.54mm_Vertical | J4 |
| 1 | ANALOGINPUTTOMEGA_CONN_02X04_ODD_EVEN analogInputToMega_Conn_02x04_Odd_Even | PinSocket_2x04_P2.54mm_Vertical | J5 |
| 1 | VOLTAGESOURCEINPUT_CONN_02X02_ODD_EVEN voltageSourceInput_Conn_02x02_Odd_Even | PinSocket_2x02_P2.54mm_Vertical | J6 |
| 1 | ANALOGINPUTFROMMEGA_CONN_01X02 analogInputFromMega_Conn_01x02 | PinSocket_1x02_P2.54mm_Vertical | J7 |
| 1 | ICSP | PinSocket_2x03_P2.54mm_Vertical | J8 |
| 1 | CONN_01X01 Conn_01x01 | PinSocket_1x01_P2.54mm_Vertical | J9 |
| 1 | GND_CONN_02X02_ODD_EVEN gnd_Conn_02x02_Odd_Even | PinSocket_2x02_P2.54mm_Vertical | J10 |
| 1 | VOUT_CONN_02X02_ODD_EVEN Vout_Conn_02x02_Odd_Even | PinSocket_2x02_P2.54mm_Vertical | J11 |
| 1 | WIFI_CONN_01X05 WIFI_Conn_01x05 | PinSocket_1x05_P2.54mm_Vertical | J12 |
| 1 | I2C_CONN_01X02 I2C_Conn_01x02 | PinSocket_1x02_P2.54mm_Horizontal | J13 |
| 1 | PWMOUTPUT_CONN_02X02_ODD_EVEN pwmOutput_Conn_02x02_Odd_Even | PinSocket_2x02_P2.54mm_Vertical | J14 |
| 1 | DIGITAL_CONN_02X02_ODD_EVEN digital_Conn_02x02_Odd_Even | PinSocket_2x02_P2.54mm_Horizontal | J15 |
| 1 | ARDUINORESET_SW_DIP_X01 arduinoRESET_SW_DIP_x01 | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 1 | RESETWIFI_SW_DIP_X01 resetWIFI_SW_DIP_x01 | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW2 |
| 1 | WIFI_SW_DIP_X02 WIFI_SW_DIP_x02 | SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW3 |
SchematicShieldPLC V0.3 design files
The KiCad project lives in the nxvxr14/control-celda-fts-mecatronica-UNAB repository on GitHub; these links point at the commit this page was built from.
SchematicShieldPLC V0.3: common questions
What microcontroller does the SchematicShieldPLC V0.3 use?
The SchematicShieldPLC V0.3 is built around the ARDUINO_MEGA2560_R3_SHIELD, from the AVR/Arduino family.
How big is the SchematicShieldPLC V0.3 PCB?
The SchematicShieldPLC V0.3 measures 118.5 × 80.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SchematicShieldPLC V0.3?
19 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SchematicShieldPLC V0.3 design files?
From the nxvxr14/control-celda-fts-mecatronica-UNAB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SchematicShieldPLC V0.3 design in my own project?
The repository has no license, so all rights stay with nxvxr14. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SchematicShieldPLC V0.3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in control-celda-fts-mecatronica-UNAB
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746