25 open source boards using the Arduino_Mega2560_R3_Shield
Real designs built with the Arduino_Mega2560_R3_Shield, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Progress 4 Final
AhmadHaniF1145
102.1 × 53.8 mm25 parts2LNo license4AVR/Arduino
LEDMetaMatrix
PanoramixDeDruide
160 × 160 mm52 parts2LUnlicense1AVR/Arduino
Asme rover elec prog
Eltohfa
108.5 × 66.6 mm102 parts4LUnlicense0AVR/Arduino
UniversalRobotController
falue
223.5 × 188 mm81 parts2LNo license0AVR/Arduino
Automated road marker
bytecod3
114.2 × 189.8 mm61 parts2LMIT0AVR/Arduino
Minesweeper
Shawky-MAHa
116.3 × 144.3 mm48 parts2LNo license0ESP32
KitEducacional
felipetrentin
120 × 106 mm46 parts2LNo license0AVR/Arduino
Schema dmp
ANToNyS21
246 × 170 mm36 parts2LNo license0AVR/Arduino
Wave box
Cingciong
128.8 × 141.7 mm36 parts2LNo license0- schematic only · 27 partsAVR/Arduino
FireBot696
evansfsu
27 partsNo license0 - schematic only · 14 partsESP32
Bci robotics team-2-mechmania-2026
Richard-Huynh1
14 partsNo license0 - schematic only · 8 partsAVR/Arduino
Rc car
Gingembre3005
8 partsNo license0 AVR/Arduino
Project Hanip
AhmadHaniF1145
102.1 × 53.9 mm25 parts2LNo license4AVR/Arduino
Fail schema dmp
ANToNyS21
242 × 160.3 mm35 parts2LNo license0AVR/Arduino
AbuDhabi ElectronBeam
monicaespinosa
130 × 145 mm53 parts2LNo license1AVR/Arduino
Schema dmp3
ANToNyS21
260 × 190 mm35 parts2LNo license0AVR/Arduino
SRAM Programming
PhysicsUofRAUI
109.2 × 57.2 mm20 parts2LMIT0AVR/Arduino
Amplifier board
marekpechal
91 × 56 mm24 parts2LNo license1AVR/Arduino
HMI
datacrystals
250 × 150 mm158 parts4LNo license0AVR/Arduino
Sucsess ehh
ANToNyS21
260 × 190 mm35 parts2LNo license0AVR/Arduino
SchematicShieldPLC V0.3
nxvxr14
118.5 × 80.9 mm19 parts2LNo license0AVR/Arduino
Sucsess maybeeee
ANToNyS21
246 × 170 mm35 parts2LNo license0AVR/Arduino
Pokus o lepsi usporadani
ANToNyS21
245 × 153.3 mm28 parts2LNo license0AVR/Arduino
Mega nRF feedthrough
michaelshiloh
99.3 × 53.6 mm7 parts2LAGPL-3.014AVR/Arduino
Prvni propojeni schema dmp
ANToNyS21
245 × 153.3 mm28 parts2LNo license0
How designs wire the Arduino_Mega2560_R3_Shield
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the Arduino_Mega2560_R3_Shield connects to, and the resistors, capacitors and other passives placed on it.
- The AREF pin is left unconnected on 14 of 15 designs.
- The IOREF pin is left unconnected on 13 of 15 designs (a signal on 2).
- The D0/RX0 pin is left unconnected on 12 of 15 designs (a signal on 3).
- The D1/TX0 pin is left unconnected on 12 of 15 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3.3Vpin 3V3 | Connected to: Not connected 60% · 3.3V 40% | — |
| SPI_5Vpin 5V2 | Connected to: Not connected 79% | — |
| A1pin A1 | Connected to: Not connected 60% · a signal 40% | — |
| A2pin A2 | Connected to: Not connected 60% · a signal 40% | — |
| A3pin A3 | Connected to: Not connected 60% · a signal 40% | — |
| A4pin A4 | Connected to: Not connected 60% · a signal 40% | — |
| A5pin A5 | Connected to: Not connected 67% · a signal 33% | — |
| A6pin A6 | Connected to: Not connected 67% · a signal 33% | — |
| A7pin A7 | Connected to: Not connected 67% · a signal 33% | — |
| A8pin A8 | Connected to: Not connected 73% · a signal 27% | — |
| A9pin A9 | Connected to: Not connected 73% · a signal 27% | — |
| A10pin A10 | Connected to: Not connected 67% · a signal 33% | — |
| A11pin A11 | Connected to: Not connected 73% · a signal 27% | — |
| A12pin A12 | Connected to: Not connected 60% · a signal 40% | — |
| A13pin A13 | Connected to: Not connected 67% · a signal 33% | — |
| A14pin A14 | Connected to: Not connected 67% · a signal 33% | — |
| A15pin A15 | Connected to: Not connected 67% · a signal 33% | — |
| AREFpin AREF | Connected to: Not connected 93% | — |
| D0/RX0pin D0 | Connected to: Not connected 80% · a signal 20% | — |
| D1/TX0pin D1 | Connected to: Not connected 80% · a signal 20% | — |
| D14/TX3pin D14 | Connected to: Not connected 60% · a signal 40% | — |
| D15/RX3pin D15 | Connected to: Not connected 60% · a signal 40% | — |
| D16/TX2pin D16 | Connected to: Not connected 60% · a signal 40% | — |
| D17/RX2pin D17 | Connected to: Not connected 60% · a signal 40% | — |
| D18/TX1pin D18 | Connected to: Not connected 67% · a signal 33% | — |
| D19/RX1pin D19 | Connected to: Not connected 67% · a signal 33% | — |
| D20/SDApin D20 | Connected to: Not connected 67% · a signal 33% | — |
| D21/SCLpin D21 | Connected to: Not connected 67% · a signal 33% | — |
| D44pin D44 | Connected to: Not connected 60% · a signal 40% | — |
| D47pin D47 | Connected to: Not connected 60% · a signal 40% | — |
| D49pin D49 | Connected to: Not connected 60% · a signal 40% | — |
| D50_MISOpin D50 | Connected to: Not connected 60% · a signal 40% | — |
| D51_MOSIpin D51 | Connected to: Not connected 67% · a signal 33% | — |
| D52_SCKpin D52 | Connected to: Not connected 60% · a signal 40% | — |
| D53_CSpin D53 | Connected to: Not connected 80% · a signal 20% | — |
| GNDpin GND1, GND2, GND3, GND5, GND6 | Connected to: GND 81% | — |
| SPI_GNDpin GND4 | Connected to: Not connected 71% · GND 29% | — |
| IOREFpin IORF | Connected to: Not connected 87% | — |
| RESETpin RST1 | Connected to: Not connected 73% · a signal 27% | — |
| SPI_RESETpin RST2 | Connected to: Not connected 86% | — |
45 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mega nRF feedthrough by michaelshiloh, Progress 4 Final by AhmadHaniF1145, Amplifier board by marekpechal and AbuDhabi ElectronBeam by monicaespinosa.
The Arduino_Mega2560_R3_Shield in open source designs
The gallery holds 25 open source boards using the Arduino_Mega2560_R3_Shield from 18 GitHub repositories; a typical one measures about 129.4 × 147.5 mm and carries around 35 components.
91% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Mega nRF feedthrough by michaelshiloh.
Parts used alongside the Arduino_Mega2560_R3_Shield
Microcontrollers on boards using the Arduino_Mega2560_R3_Shield
What boards using the Arduino_Mega2560_R3_Shield are built for
Arduino_Mega2560_R3_Shield: common questions
Where can I find a Arduino_Mega2560_R3_Shield reference design?
Each of the 25 boards on this page is a real design using the Arduino_Mega2560_R3_Shield. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the Arduino_Mega2560_R3_Shield AREF pin connected?
The AREF pin is left unconnected on 14 of 15 designs. Counted from the KiCad layouts of 15 open source designs using the Arduino_Mega2560_R3_Shield.
How is the Arduino_Mega2560_R3_Shield IOREF pin connected?
The IOREF pin is left unconnected on 13 of 15 designs (a signal on 2). Counted from the KiCad layouts of 15 open source designs using the Arduino_Mega2560_R3_Shield.
How is the Arduino_Mega2560_R3_Shield D0/RX0 pin connected?
The D0/RX0 pin is left unconnected on 12 of 15 designs (a signal on 3). Counted from the KiCad layouts of 15 open source designs using the Arduino_Mega2560_R3_Shield.
Which microcontrollers do boards using the Arduino_Mega2560_R3_Shield use?
Most are built on AVR/Arduino (23) and ESP32 (2).
How big is a typical board using the Arduino_Mega2560_R3_Shield?
The median is 129.4 × 147.5 mm, and 91% are two-layer designs.
What is the most popular open source board using the Arduino_Mega2560_R3_Shield?
By GitHub stars, Mega nRF feedthrough by michaelshiloh, with 14 stars.
Can I simulate one of these boards using the Arduino_Mega2560_R3_Shield before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.