Phantomdrive
About the Phantomdrive PCB
Phantomdrive is an open source PCB design by o7-machinehum, published on GitHub under the MIT license. It is a 4-layer board measuring 36.4 × 15 mm, with 47 components from 16 distinct parts.
Other key parts include the CH569W, TLV62569DBV and TPD2EUSB30DRTR. By type, the board carries 28 capacitors, 7 resistors, 6 ICs, 2 connectors, 2 inductors and 1 crystal.
From the project
Seemingly normal USB drive with a hidden security feature
Ovrdrive -------- Size : 36.6 x 15 mm Layer : 4 Layers Material : FR-4: TG150 Thickness : 0.6 mm Min track/spacing : 4/4mil Min hole size : 0.2mm Solder mask : Black Silkscreen : White Edge connector : No Surface finish : HASL lead free Via process : Tenting vias Finished copper : 1 oz Cu (Inner Copper:1 oz) Remove product No. : Yes
Main components on the Phantomdrive
Phantomdrive bill of materials (BOM)
47 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH569W | QFN-68-1EP_8x8mm_P0.4mm_EP5.2x5.2mm | U1 |
| 2 | TLV62569DBV | SOT-23-5 | U2, U3 |
| 3 | TPD2EUSB30DRTR TPD2EUSB30 | Texas_DRT-3 | U5, U6, U7 |
| 1 | ABM8-30.000MHZ-12-B1U-T 30Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 692112030100 USB3_A | USB3_A_Plug_Wuerth_692112030100_Horizontal | J2 |
| 1 | DM3AT-SF-PEJM5 Micro_SD_Card_Det_Hirose_DM3AT | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J4 |
| 1 | SKRKAEE020 SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 2 | SRN3015-2R2M 2.2uH | L_Changjiang_FTC303015D | L1, L2 |
| 2 | CL05A475MP5NRNC 4.7uF | C_0402_1005Metric | C1, C6 |
| 7 | CL05A226MQ5N6J8 22uF | C_0402_1005Metric | C2, C5, C7, C9, C11, C12, C13 |
| 15 | CL05B104KP5NNNC 100nF | C_0402_1005Metric | C3, C4, C8, C10, C14, C15, C16, C17 +7 |
| 2 | CL05C150JB5NNNC 15pF | C_0402_1005Metric | C19, C20 |
| 2 | CL05A225MQ5NNNC 2.2uF | C_0402_1005Metric | C24, C25 |
| 4 | RC0402FR-07100KL 100k | C_0402_1005Metric | R1, R2, R4, R5 |
| 1 | RC0402FR-07453KL 450k | C_0402_1005Metric | R3 |
| 2 | CAT10-473J4LF 47k | R_Array_Concave_4x0402 | RN1, RN2 |
Phantomdrive design files
The KiCad project lives in the o7-machinehum/phantomdrive repository on GitHub; these links point at the commit this page was built from.
Phantomdrive: common questions
How big is the Phantomdrive PCB?
The Phantomdrive measures 36.4 × 15 mm, has 4 copper layers and is 0.6 mm thick.
How many components are on the Phantomdrive?
47 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Phantomdrive design files?
From the o7-machinehum/phantomdrive repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Phantomdrive design in my own project?
Yes, under the terms of its MIT license, which o7-machinehum chose for the repository.