5 open source boards using the CH569W

Real designs built with the CH569W, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The CH569W in open source designs

The gallery holds 5 open source boards using the CH569W from 3 GitHub repositories; a typical one measures about 50 × 70 mm and carries around 108 components.

100% use four copper layers or more, and 40% carry an open source license.

The most starred is Phantomdrive by o7-machinehum.

Parts used alongside the CH569W

Microcontrollers on boards using the CH569W

CH569W: common questions

Where can I find a CH569W reference design?

Each of the 5 boards on this page is a real design using the CH569W. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the CH569W use?

Most are built on RP2040/RP2350 (2).

How big is a typical board using the CH569W?

The median is 50 × 70 mm, and 0% are two-layer designs.

What is the most popular open source board using the CH569W?

By GitHub stars, Phantomdrive by o7-machinehum, with 878 stars.

Can I simulate one of these boards using the CH569W before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part