Pi zero shield
About the Pi zero shield
Pi zero shield is an open source PCB design by ocean-discovery-league, published on GitHub. It is a 2-layer board measuring 30.8 × 65 mm, with 16 components from 13 distinct parts.
Other key parts include the DRV2605LDGS. By type, the board carries 6 connectors, 5 capacitors, 2 resistors, 1 IC, 1 buzzer and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
All files needed to build a Maka Niu
Instructions for fabrication and software installation here.
Please direct all questions concerning fabrication plans or direct purchase of the Delrin housing to Dr. Allan Adams of Oceanic Labs (allan@oceanic-labs.org)
Main components on the Pi zero shield
Pi zero shield bill of materials (BOM)
16 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV2605LDGS | VSSOP-10_3x3mm_P0.5mm | U1 |
| 1 | T1M-10-F-SV-L | SAMTEC_T1M-10-F-SV-L | J1 |
| 1 | Conn_02x20_Odd_Even | Pi_PinSocket_2x20 | J2 |
| 1 | T1M-06-X-DV | SAMTEC_T1M-06-X-DV | J3 |
| 1 | Screw_Terminal_01x10 | PinHeader_1x10_P2.54mm_Vertical | J4 |
| 1 | Conn_01x02 | Molex_Micro-Fit_3.0_43650-0210_1x02-1MP_P3.00mm_Horizontal | J5 |
| 1 | Conn_01x03 | Molex_Micro-Fit_3.0_43650-0310_1x03-1MP_P3.00mm_Horizontal | J6 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | 30V 500mA | D_SOD-123 | D1 |
| 2 | 1.0uF | C_0603_1608Metric | C1, C2 |
| 1 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 2 | DNP | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5 |
| 2 | 10K | R_0603_1608Metric | R1, R2 |
Pi zero shield design files
The KiCad project lives in the ocean-discovery-league/maka-niu-design-files repository on GitHub; these links point at the commit this page was built from.
Pi zero shield: common questions
How big is the Pi zero shield?
The Pi zero shield measures 30.8 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pi zero shield?
16 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pi zero shield design files?
From the ocean-discovery-league/maka-niu-design-files repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pi zero shield design in my own project?
The repository has no license, so all rights stay with ocean-discovery-league. Use it as a reference, and ask the author before reusing the design.
More boards in maka-niu-design-files
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979