HardLabs

Pcb Project

ODARI-CHARLES1·Pcb_Project

Pcb Project layout, top view — open source AVR/Arduino board by ODARI-CHARLES1

About the Pcb Project

Pcb Project is an open source AVR/Arduino PCB design by ODARI-CHARLES1, published on GitHub. It is a 2-layer board measuring 75.1 × 50.1 mm, with 14 components from 7 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the MAX30102 and SSD1306. By type, the board carries 4 resistors, 3 switches, 3 capacitors, 2 ICs, 1 module and 1 diode.

From the project

A tutorial on creating a custom symbol and Footprint

Main components on the Pcb Project

MAX30102SSD1306Arduino_Nano_v3.x

Pcb Project bill of materials (BOM)

14 components, 7 distinct parts.

QtyPartRefs
1
MAX30102
U1
1
SSD1306
U2
1
Arduino_Nano_v3.x
A1
3
SW_Push
SW1, SW2, SW3
1
~
D1
3
100n
C1, C2, C3
4
1k
R1, R2, R3, R4

Pcb Project design files

The KiCad project lives in the ODARI-CHARLES1/Pcb_Project repository on GitHub; these links point at the commit this page was built from.

Pcb Project: common questions

What microcontroller does the Pcb Project use?

The Pcb Project is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Pcb Project?

The Pcb Project measures 75.1 × 50.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb Project?

14 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb Project design files?

From the ODARI-CHARLES1/Pcb_Project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pcb Project design in my own project?

The repository has no license, so all rights stay with ODARI-CHARLES1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pcb Project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards