OE-PyBoard
oeps-tech·OE-PyBoard·PCB/OE PyBoard.kicad_pcb
About the OE-PyBoard PCB
OE-PyBoard is an open source STM32 PCB design by oeps-tech, published on GitHub. It is a 4-layer board measuring 33 × 41.9 mm, with 55 components from 27 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the MCP1700T-3302E/TT. By type, the board carries 20 resistors, 19 capacitors, 5 diodes, 3 connectors, 2 ICs and 2 crystals.
From the project
Our MicroPyhton version using USB-C
Main components on the OE-PyBoard
OE-PyBoard bill of materials (BOM)
55 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGT6 | LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | MCP1700T-3302E/TT MCP1700T | SOT-23 | U3 |
| 1 | ABM8AIG-12.000MHZ-12-2Z-T3 12 MHz | Crystal_SMD_Abracon_ABM8AIG-4Pin_3.2x2.5mm | X2 |
| 1 | 9HT11-32.768KBZF-T 32.768 kHz | Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering | X3 |
| 1 | USB4105-GF-A | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 2 | CES-116-01-T-S Conn_01x08 | PinHeader_1x16_P2.54mm_Vertical | J6, J7 |
| 1 | Jumper | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 2 | TL3305BF260QG SW_SPST | SW_SPST_TL3305B | RST2, USR2 |
| 1 | SM5817PL-TP SM5817PL | D_SOD-123 | D2 |
| 1 | 5990010007F LED-RED | LED_0603_1608Metric | D3 |
| 1 | LSM0603453V LED-GREEN | LED_0603_1608Metric | D4 |
| 1 | 5990040007F LED-YELLOW | LED_0603_1608Metric | D5 |
| 1 | 5988D90107F LED-BLUE | LED_0603_1608Metric | D6 |
| 1 | BLM15HD102SN1D 1k@100MHz | L_0402_1005Metric | FB2 |
| 3 | C1608X6S1C475K080AC 4.7uF | C_0603_1608Metric | C3, C16, C17 |
| 8 | CGA2B3X7R1H104K050BB 100nF | C_0402_1005Metric | C4, C5, C6, C7, C10, C12, C18, C22 |
| 3 | GRM188R61E225KA12D 2.2uF | C_0603_1608Metric | C8, C9, C15 |
| 1 | 885012205084 4.7nF | C_0402_1005Metric | C11 |
| 4 | GRM1555C1H120JA01D 12pF | C_0402_1005Metric | C13, C14, C19, C20 |
| 4 | CRCW0402560RFKED 560R | R_0402_1005Metric | R2, R18, R19, R20 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ERJ-2RKF5101X 5.1k | R_0402_1005Metric | R3, R4 |
| 2 | RMCF0402FT27R0 27R | R_0402_1005Metric | R5, R7 |
| 3 | AC0402FR-07100KL 100k | R_0402_1005Metric | R6, R14, R15 |
| 1 | ERJ-2RKF1002X 10k | R_0402_1005Metric | R8 |
| 1 | CRCW04021M00FKED 1M | R_0402_1005Metric | R9 |
| 6 | ERJ-2RKF4701X 4k7 | R_0402_1005Metric | R10, R11, R12, R13, R17, R21 |
| 1 | CRCW0402270RFKEDC 270R | R_0402_1005Metric | R22 |
OE-PyBoard design files
The KiCad project lives in the oeps-tech/OE-PyBoard repository on GitHub; these links point at the commit this page was built from.
OE-PyBoard: common questions
What microcontroller does the OE-PyBoard use?
The OE-PyBoard is built around the STM32F405RGT6, from the STM32 family.
How big is the OE-PyBoard PCB?
The OE-PyBoard measures 33 × 41.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the OE-PyBoard?
55 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OE-PyBoard design files?
From the oeps-tech/OE-PyBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OE-PyBoard design in my own project?
The repository has no license, so all rights stay with oeps-tech. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the OE-PyBoard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k