Turbotronik NT 150 360 control
About the Turbotronik NT 150 360 control PCB
Turbotronik NT 150 360 control is an open source AVR/Arduino PCB design by ograsdijk, published on GitHub. It is a 2-layer board measuring 88.7 × 105.9 mm, with 15 components from 9 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the CPC1117NTR. By type, the board carries 6 connectors, 5 resistors, 2 relays, 1 IC and 1 module.
Main components on the Turbotronik NT 150 360 control
Turbotronik NT 150 360 control bill of materials (BOM)
15 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CPC1117NTR | SOIC254P610X218-4N | U1 |
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 2 | S3B-PH-K-S(LF)(SN) | JST_S3B-PH-K-S(LF)(SN) | J1, J2 |
| 1 | EJ503A | MPD_EJ503A | J3 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | Conn_01x08 | PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | S4B-PH-K-SLFSN | S4B-PH-K-SLFSN | J6 |
| 2 | G3VM-41GR5 | G3VM-41GR5 | K1, K2 |
| 5 | R | R_0603_1608Metric | R1, R2, R3, R4, R5 |
Turbotronik NT 150 360 control design files
The KiCad project lives in the ograsdijk/CeNTREX-pcb repository on GitHub; these links point at the commit this page was built from.
Turbotronik NT 150 360 control: common questions
What microcontroller does the Turbotronik NT 150 360 control use?
The Turbotronik NT 150 360 control is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the Turbotronik NT 150 360 control PCB?
The Turbotronik NT 150 360 control measures 88.7 × 105.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Turbotronik NT 150 360 control?
15 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Turbotronik NT 150 360 control design files?
From the ograsdijk/CeNTREX-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Turbotronik NT 150 360 control design in my own project?
The repository has no license, so all rights stay with ograsdijk. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Turbotronik NT 150 360 control without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in CeNTREX-pcb
Relay ctrl lab
221 × 74.4 mm55 parts2LNo license1
NXPSsr cavity multiplexer
273.1 × 39.1 mm40 parts2LNo license1
16 input multiplexer
337.8 × 30.5 mm24 parts2LNo license1
NXPTeensy dio
128.8 × 137.9 mm20 parts2LNo license1
3 cavity multiplexer
212.1 × 43.2 mm19 parts2LNo license1
Relay ctrl compressor cabinet
81.9 × 52.1 mm17 parts2LNo license1
NXPTeensy ads1115
100.8 × 108 mm14 parts2LNo license1
PXIe5171 PFI breakout
128.5 × 137.9 mm10 parts2LNo license1
NKT Basik single ended to differential modulation V2
12.2 × 13.5 mm7 parts2LNo license1
Labjack breakout
64.8 × 125.7 mm7 parts2LNo license1
Hornet shield
58.7 × 77.5 mm7 parts2LNo license1
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746