Synth teensy

OleksiiMykhailov1·teensy-synth-project·PCB files/teensy_3_6_pcb/synth_teensy.kicad_pcb

Synth teensy PCB layout, top view — open source NXP board by OleksiiMykhailov1

About the Synth teensy PCB

Synth teensy is an open source NXP PCB design by OleksiiMykhailov1, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 145.2 mm, with 74 components from 18 distinct parts.

Its main chip is the Teensy3.6, from the NXP family. Other key parts include the TFT_320x240, AP7313-33SAG-7 and SGTL5000XNAA3. By type, the board carries 20 switches, 20 diodes, 14 capacitors, 10 resistors, 4 ICs and 3 jumpers.

It belongs with the audio and keyboards designs in this gallery.

From the project

My attempt to create a pocket-sized synthesizer based on the Teensy Audio Library

This is a project I was working on in 2023. My main goal was to create an interesting object to interact with while learning about software and hardware development. Before starting it, I did some small projects with Arduino and assembled a small analogue synth with 3 voices and a low-pass filter. I found the programming part more interesting to me, and it allowed more to be done. Teensy 3.6 was chosen because it works with the Audio Library and Audio Systems Design Tool, which allow me to work on system design while relying on a professionally written DSP and an easy-to-use design tool to…

Synth teensy, from the project README
From the project README

Main components on the Synth teensy

Synth teensy bill of materials (BOM)

74 components, 18 distinct parts.

QtyPartRefs
1
TFT_320x240
U1
1
Teensy3.6
U2
1
AP7313-33SAG-7
U3
1
SGTL5000XNAA3
U4
1
Headphones
J1
1
Audio IN
J3
2
SolderJumper_2_Bridged
JP1, JP2
1
SolderJumper_3_Bridged12
JP3
20
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +12
20
1N4001
D1, D2, D3, D4, D5, D6, D7, D8 +12
1
FerriteBead 600
FB1
6
100nf
C1, C2, C5, C8, C13, C14
2
0.1uF
C3, C6
5
2.2uF
C4, C7, C10, C11, C12
1
150nF
C9
2
R100
R1, R10
5
10K
R2, R3, R4, R5, R6
3
2.2K
R7, R8, R9

Synth teensy design files

The KiCad project lives in the OleksiiMykhailov1/teensy-synth-project repository on GitHub; these links point at the commit this page was built from.

Synth teensy: common questions

What microcontroller does the Synth teensy use?

The Synth teensy is built around the Teensy3.6, from the NXP family.

How big is the Synth teensy PCB?

The Synth teensy measures 90 × 145.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Synth teensy?

74 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Synth teensy design files?

From the OleksiiMykhailov1/teensy-synth-project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Synth teensy design in my own project?

Yes, under the terms of its MIT license, which OleksiiMykhailov1 chose for the repository.

Can I test firmware for the Synth teensy without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in teensy-synth-project

Similar boards