New synth teensy4 1

OleksiiMykhailov1·teensy-synth-project·PCB files/teensy_4_1_pcb/new_synth_teensy4_1.kicad_pcb

New synth teensy4 1 PCB layout, top view — open source NXP board by OleksiiMykhailov1

About the New synth teensy4 1 PCB

New synth teensy4 1 is an open source NXP PCB design by OleksiiMykhailov1, published on GitHub under the MIT license. It is a 2-layer board measuring 75.4 × 128.2 mm, with 68 components from 28 distinct parts.

Its main chip is the Teensy4.1, from the NXP family. Other key parts include the TP4056 and MT3608. By type, the board carries 18 diodes, 16 switches, 14 resistors, 10 capacitors, 6 ICs and 2 connectors.

It belongs with the audio and keyboards designs in this gallery.

From the project

My attempt to create a pocket-sized synthesizer based on the Teensy Audio Library

This is a project I was working on in 2023. My main goal was to create an interesting object to interact with while learning about software and hardware development. Before starting it, I did some small projects with Arduino and assembled a small analogue synth with 3 voices and a low-pass filter. I found the programming part more interesting to me, and it allowed more to be done. Teensy 3.6 was chosen because it works with the Audio Library and Audio Systems Design Tool, which allow me to work on system design while relying on a professionally written DSP and an easy-to-use design tool to…

New synth teensy4 1, from the project README
From the project README

Main components on the New synth teensy4 1

New synth teensy4 1 bill of materials (BOM)

68 components, 28 distinct parts.

QtyPartRefs
1
Teensy4.1
U2
1
~
U3
1
TP4056
U4
1
~
U5
1
MT3608
U6
1
~
U7
1
~
Q1
1
AudioJack2_Ground
J1
1
USB_B_Micro
J2
15
SW_Push
SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +7
1
SW_DIP_x01
SW22
15
1N4001
D1, D2, D3, D4, D5, D6, D7, D8 +7
1
RED
D21
1
GREEN
D22
1
D_Schottky
D23
1
22UH
L1
2
100nF
C1, C2
2
0.1uF
C3, C8
3
47uF
C4, C6, C7
1
10uf
C5
Show 8 more
QtyPartRefs
2
22uf
C9, C10
5
10K
R1, R2, R3, R4, R5
1
1k?
R6
1
10R
R7
3
1k
R8, R9, R14
2
2K
R10, R12
1
r100
R11
1
7.5k
R13

New synth teensy4 1 design files

The KiCad project lives in the OleksiiMykhailov1/teensy-synth-project repository on GitHub; these links point at the commit this page was built from.

New synth teensy4 1: common questions

What microcontroller does the New synth teensy4 1 use?

The New synth teensy4 1 is built around the Teensy4.1, from the NXP family.

How big is the New synth teensy4 1 PCB?

The New synth teensy4 1 measures 75.4 × 128.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the New synth teensy4 1?

68 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the New synth teensy4 1 design files?

From the OleksiiMykhailov1/teensy-synth-project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the New synth teensy4 1 design in my own project?

Yes, under the terms of its MIT license, which OleksiiMykhailov1 chose for the repository.

Can I test firmware for the New synth teensy4 1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in teensy-synth-project

Similar boards