HardLabs

TERES-PCB5-KEYBOARD Rev.A

OLIMEX·DIY-LAPTOP·HARDWARE/A64-TERES/TERES-PCB5-KEYBOARD/Rev.A/TERES-PCB5-KEYBOARD_Rev.A.kicad_pcb

TERES-PCB5-KEYBOARD Rev.A PCB layout, top view — open source AVR/Arduino board by OLIMEX

About the TERES-PCB5-KEYBOARD Rev.A PCB

TERES-PCB5-KEYBOARD Rev.A is an open source AVR/Arduino PCB design by OLIMEX, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 68.5 × 34.5 mm, with 46 components from 15 distinct parts.

Its main chip is the ATMEGA16U4-A, from the AVR/Arduino family. By type, the board carries 27 capacitors, 10 resistors, 3 connectors, 1 IC, 1 crystal and 1 inductor.

It belongs with the keyboards and audio designs in this gallery.

From the project

Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

All hardware schematics and board files are designed using KiCad open-source CAD software.

You may download KiCad and open for reviewing or editing each of the PCB files. The schematics are also available as PDF files for easier viewing and/or printing.

NOTE: Please use the latest KiCad nightly development build, as the latest stable build may not have all required features.

TERES-PCB5-KEYBOARD Rev.A, from the project README
From the project README

Main components on the TERES-PCB5-KEYBOARD Rev.A

ATMEGA16U4-A

TERES-PCB5-KEYBOARD Rev.A bill of materials (BOM)

46 components, 15 distinct parts.

QtyPartRefs
1
ATMEGA16U4-A
U1
1
16.000MHz/SMD5x3.2/12pF
Y1
1
CONN_01X24
P1
1
CONN_01X06
P2
1
CONN_01X12
P3
1
d.n.p.(HR2x3)
ICSP0
2
4x1.5K_RA1206
RP1, RP2
1
FB0805
L1
2
220nF
C1, C2
5
100nF
C3, C4, C5, C8, C9
2
1uF
C6, C7
16
1nF
C10, C11, C12, C13, C14, C15, C16, C17 +8
2
22pF
C26, C27
7
10K
R1, R4, R5, R6, R7, R9, R10
3
22R
R2, R3, R8

TERES-PCB5-KEYBOARD Rev.A design files

The KiCad project lives in the OLIMEX/DIY-LAPTOP repository on GitHub; these links point at the commit this page was built from.

TERES-PCB5-KEYBOARD Rev.A: common questions

What microcontroller does the TERES-PCB5-KEYBOARD Rev.A use?

The TERES-PCB5-KEYBOARD Rev.A is built around the ATMEGA16U4-A, from the AVR/Arduino family.

How big is the TERES-PCB5-KEYBOARD Rev.A PCB?

The TERES-PCB5-KEYBOARD Rev.A measures 68.5 × 34.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TERES-PCB5-KEYBOARD Rev.A?

46 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the TERES-PCB5-KEYBOARD Rev.A design files?

From the OLIMEX/DIY-LAPTOP repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the TERES-PCB5-KEYBOARD Rev.A design in my own project?

Yes, under the terms of its Apache-2.0 license, which OLIMEX chose for the repository.

Can I test firmware for the TERES-PCB5-KEYBOARD Rev.A without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in DIY-LAPTOP

Similar boards