POEv3

OLIMEX·POEv3·Hardware/POEv3 hardware revision A/POEv3_Rev_A.kicad_pcb

POEv3 PCB layout, top view — open source board by OLIMEX

About the POEv3 PCB

POEv3 is an open source PCB design by OLIMEX, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 30 × 30 mm, with 29 components from 23 distinct parts.

Other key parts include the TPS2378DDAR(HSOIC-8) and TX4138(ESOIC-8). By type, the board carries 11 resistors, 6 capacitors, 2 ICs, 2 diodes and 1 inductor.

From the project

Power Over Ethernet 802.03af compatible non isolated powet supply module

POEv3, from the project README
From the project README

Main components on the POEv3

POEv3 bill of materials (BOM)

29 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS2378DDAR(HSOIC-8)
U1
1
TX4138(ESOIC-8)
U2
1
CABLE-PH2-4-60-R
Cable-PoE1
1
Closed
Class4_EN1
4
Mounting_Hole_NPTH
MH1, MH2, MH3, MH4
1
PH2.0-4AT
POE_PWR1
1
SMAJ58A/SMA
D1
1
SS510/100V/5A/0.85V/DO214AB(SMC)
D2
1
33uH/2.1A/DCR=0.1R/20%/DBS135(PD3316MT330)
L1
2
100nF/100V/10%/X7R/C0603
C1, C4
1
100uF/63V/20%/Low_ESR/RM5/10x13MM
C2
1
NA(220pF/100V/C0603)
C3
1
12pF/50V/5%/C0G/C0402
C5
1
470uF/16V/20%/LOW_ESR/RM3.5/8x12MM
C6
1
24.9k/1%/R0402
R1
1
1.27k/1%/62.5mW/R0402
R2
1
66.5R/1%/125mW/R0805
R3
2
9.1K/1W/R2512
9.1k/1W/R2512
R4, R5
2
0.03R/1%/R1206
R6, R7
1
4.7R/R0402
R8
Show 3 more
QtyPartRefs
1
NA(22R/R0603)
R9
1
5.23k/1%/R0402
R10
1
30.1k/1%/R0402
R11

POEv3 design files

The KiCad project lives in the OLIMEX/POEv3 repository on GitHub; these links point at the commit this page was built from.

POEv3: common questions

How big is the POEv3 PCB?

The POEv3 measures 30 × 30 mm, has 4 copper layers and is 1.578 mm thick.

How many components are on the POEv3?

29 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the POEv3 design files?

From the OLIMEX/POEv3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the POEv3 design in my own project?

Yes, under the terms of its GPL-3.0 license, which OLIMEX chose for the repository.